Security: Video

This article presents what web browsers are supported by Bosch IP cameras. Also, presents the tools to be used in replacement of Internet Explorer and MPEG-ActiveX.

This article contains the information about the default path where  the recordings of Bosch Video Client are set.

Both RJ45 and M12 plug connectors are available with IEC 11801:2002 Cat5 compliance. This further simplifies the concurrent use of both connector types within a single system.

If you cannot access any program from kiosk mode or they are randomly opened on your DIVAR IP AIO, this happens because you double click on the icons.

This feature is not available in BVMS 10.1. You cannot do it automatically for multiple cameras. You can do it one by one manually through Config Client.

.NET Framework is the original implementation of .NET. It supports running websites, services, desktop apps, and more on Windows. The system requirements for Configuration Manager state .NET 4.7.2 as necessary to be installed. Configuration Manager v7.30 installation package does not provide .NET Framework 4.7.2.

Find out from this article how to configure a singe mode VIF on NetApp array. For example if we have 2 (or more) physical interfaces, how to connect them to different network segments and, if one of the segments fails, the second network interface to step in automatically?

Is DIVAR IP 6000 R1 compatible with VRM v.3.83.0021 (64-bit) and BVMS Viewer 10.1?

VIDEOJET decoder 3000 is only capable of decoding H.264 video.

This article shows from where can I find my Bosch Remote Portal ID.

This article gives you more information about FLEXIDOME IP starlight 8000i camera streaming capabilities.

With the DSA E2800 Bosch introduced Multipathing. It is a fault-tolerance technique that defines more than one physical path between the camera and its iSCSI storage devices through redundant network connections. When using this feature, recording of video data and replaying video data is possible even in case of an iSCSI controller failure. To ensure also that outages of infrastructure equipment (e.g. Switch) could be covered, we recommend following Interconnection.  

This article presents where you can find and download the Firmware for NetApp DSA unit. Depending on the version you need, you can access this E-Series SANtricity OS Controller Software Link for Downloads. 

If you have the option "Extended (security)/configuration mode" active on a VIDEOJET decoder 7000 (VJD-7513) in Configuration Manager, then no video image will be shown and the BOSCH logo will be displayed at the cameo of the monitor output of the decoder. This is as designed in Configuration Manager, and this mode is to give you the opportunity to enable the SSD Encryption and to disable the USB ports. Once you are finished changing the extended security features, you must uncheck the check box and the decoder will go back to normal functioning.

This FAQ article contains a lot of questions and answers related to Bosch Remote System Management service 

This article answer how the DIVAR network or hybrid UHD monitor setting cause black screen when UHD not supported After changing the resolution of monitor to UHD (3840*2160), the attached monitors results always black.

Check this article and find out if you can add and see a BVMS 11 system running on a DIP in MVS webpage as unmanaged site

For years, we’ve provided a convenient way to view live videos from the Bosch Video Security Client via Remote Portal to complement our products. We’re delighted to share an enhanced service coming in April 2024. VideoView+ is a purchasable license that is simple and user-friendly to access your videos from anywhere.

This article provides an answer if the  an OS upgrade to Win2016 can be performed on old DIP 3000, DIP 6000 or 7000 R1.