Security: Video

In principle, the Autodome starlight 5100i IR camera (NDP-5523-Z30L) may only be operated with switches, midspans or PoE injectors that meet the EEE802.3bt standard! - Or use 24VAC.**

Find out from this article how does the ‘Active profile’ work for Flexidome Multi 7000i camera

IVA pro Buildings pack and Traffic pack on CPP14 use the following resolutions: 1280x720 resolution for 25/30 fps base rate,  1024x576 resolution for 50/60 fps base rate.

Remote VCA configuration through the camera's device page (website) now can be performed with Bosch Configuration Manager version 7.60 and later.

This account has been locked because of too many failed login attempts. Try again in 39 seconds.

BP+ (Baseline Profile +) is available in any of the new ARM based chipset encoders, like the VIP-X1 XF.  BP+ is needed for compatibility with Divar and hardware decoders, for example, theVIP XD decoder.

The RTC_AUDIO_LOUDSPEAKER_ON_OFF flag is not activated.

Answer It only depends on the version of BVMS you have. If you have BVMS 7.5, certain cameras with a certain FW have been tested and are supported. If you have BVMS 8.0, certain cameras with a certain FW have been tested and are supported. For BVMS versions of 9.0 or lower, only tested cameras must be added, otherwise we cannot support new setup. On DIP 3000 you can only upgrade to BVMS 8.0. The version of Windows installed on it does not support older versions of BVMS, it is not compatible. Recommended to use BVMS 8.0, the largest version supported on that unit. You need to make sure that those cameras are on the list of tested devices of the version you have.   Regarding the ONVIF Compatibility of the cameras, please see the following Bosch Knowledge Base article: https://community.boschsecurity.com/t5/Security-Video/BVMS-ONVIF-Device-compatibility/ta-p/4252

The "Import" icon may be missing from table view in Configuration Manager, version <7.50. Therefore, we recommend to update the Configuration Manager to v7.50

To change the camera name in Remote Portal, you need to change the camera's Device name and then re-register the camera to Remote Portal.

Transcoding is the feature to display the streaming of live video as smooth as possible based on available network bandwidth. In this article you will find out why there is black image in Op. Client (Transcoder not available)

  What does mean the clock symbol showed in the Operator Client Logical tree?

The package updates to the latest recovery image (app0), regardless of which app1 or former app0 firmware is running on any CPP4, 6, 7 or 7.3 platform.

XProtect offers 3 different modes of metadata streaming. What are the differences there?

This only happens when you perform the export in BVMS Operator Client.

Windows 11 Pro is now officially supported as OS for BVMS 11.1.1 Operator Client

Divar 700 uses the concept where it assumes to be the (master) device to have control over the cameras and their streams.

This article contains a simplified and generalized example, that could be helpful in building a particular tailored script related to implementation of event receiver in BVMS SDK scriplet.

Find out here what could be the cause of the following message displayed on DIVAR IP 7000 R2: "The instruction at 0x6566f31c referenced memory at 0x00000008. The memory could not be read."

Refer to this article if you are looking for what  default ports are used with Intelligent Insights