Security: Video

Do you want to configure Video Content Analysis of your device and "VCA: Authorization required" message is displayed in Configuration Manager? Find out here why this message is displayed and what you should do to fix it.

Check this article and see what's new in Project Assistant version 1.4.0

Welcome to the 2.3.0 release of Project Assistant for Windows, Android and iOS. There are many new features and bug fixes in this release that are detailed in this article.

This article explains what can you do when ‘Authentication failed’ message occurs when accessing VSG in BVMS v11.0

This article explains why the Live view shows ‘Authentication failed’ in Video Security App.

Waiting For Power - Invalid PoE source was detected during the auto-negotiation. The Pan Motor, Tilt motor, and the heaters will be disabled.

This article explains how to find and calculate the specific size of BVMS logs on your server when the log starts to overwrite your own data.

This article mentioned which ports does Configuration Manager use for devices searching. The RCP+ discovery port for Bosch cameras, encoder and decoders is port 1800.

The initial idea of the Project Assistant is nicely summarized in the video from this article

Port Mapping Table dialog box displays the port mapping for the IP addresses of the configured devices in your BVMS. Be aware that this option was removed starting with BVMS 11.1

If cleaning the bubble is required, use the following procedures and comply with all the warnings listed in this article.

Remote Connect Lite service enables connection between Divar network/hybrid, cloud and client software.

This camera does not have the auto-focus functionality in the same sense as Autodome / Mic cameras.

Question Why I cannot see my camera in the Logical Tree from Operator Client? Answer Please make sure that you have done all the steps below accordingly. Normally, to be able to view a camera in the Operator Client, you need to: Go to the Maps and Structure tab from Configuration Client. Drag and drop the camera in question from the Device Tree to the Logical Tree. Save and Activate the changes. This step is very important because otherwise, you will not be able to see the changes in Operator Client, even though the first 2 steps were carried out in Configuration Client.

BVMS OPC server restricts the use of some symbols in the camera names

Check out this article and find out the streaming capabilities of CPP7 & CPP7.3 Bosch IP cameras

This article explains how to configure an alarm communication between BVMS and Gmail e-mail address.

Use the CTFID tool (Configuration Tool for Imaging Devices) for configuring the camera. Find in this article the download link and the release note.

Using the following command you can reset the result of People counting via SDK: http://<IP_address>/rcp.xml?command=0x0b4a&type=P_OCTET&direction=WRITE&num=1

Applicable when using the following software application. Bosch Video Management System (BVMS) version 10.0.1 and above. Bosch Configuration Manager version 7.0 and above. Live page on the web browser for IP camera operating on firmware version 7.70.0126 and above.