With fw7.70 a new feature was introduced that allows you to tune the scene for Day and Night separately using 2 custom scene modes.
This article explains how to switch the scene modes Custom mode#1 & Custom mode#2 based on Day or Night for Bosch cameras
This article lists how to configure ANR feature in BVMS and how correctly to set up iSCSI and direct replay.
Configuration of ANR in BVMS system
Insert SD card into camera and power it on.
In Configuration Client, select Devices page.
Device password and CHAP password. There are two possible configuration set ups - to configure password for both device and iSCSI connection or to leave both without password. Choose and configure one of them (3.1 or 3..2).
3.1. Set device user password and CHAP password
3.2. No CHAP password for ANR
Note: Mixing the parameters between the two options 3.1 and 3.2 will lead to issues in direct replay from SD card.
Traffic detector has been developed to cope with all traffic densities up to high density like congestions and queues in front of traffic lights. It also detects non-moving vehicles and is thus applicable for smart parking. In addition to vehicles, it also detects pedestrians.
Tunnels & Highways: o Collection of traffic statistics o Detection of congestions for automatic speed signaling o Detection of wrong way driving
Intersections: o Detecting presence and volume of vehicles
Smart parking: o Detect parked cars
This article provides a step-by-step guide about how you can disable UPnP of Bosch IP cameras & multicast scan from Configuration Manager.
One of the reason why UPnP (Universal Plug and Play) is enabled in our devices is because ONVIF uses this to scan the ONVIF device in the network.
If you have CPP4 cameras with 6.11 firmware (FW) version and you need to upgrade them to the latest version, normally you have to upgrade to an intermediate firmware version first.
But where you can find this firmware ?