Security: Video

If you were asked by the Central Technical Support team to provide them with the Bios defaults picture with the Boot order of your DIVAR IP during the troubleshooting process of your device, please follow the steps from this article and find out how can you check the boot order of a DIVAR IP

To access the "Reset" options of a DIVAR IP 2000 Recording Appliance, you have to open the Appliance's "Dashboard".

The purpose of this article is to assist you with the creation of mirrored drive sets in a DIVAR IP all-in-one 5000 Recording Appliance.This procedure should be performed on new appliances that have not yet been deployed.

🛈 Port Forwarding Allows remote computers (for example, computers on the Internet) to connect to a specific computer or service within a private local-area network (LAN). In a typical residential network, nodes obtain Internet access through a DSL or cable modem connected to a router or network address translator (NAT/NAPT). Hosts on the private network are connected to an Ethernet switch or communicate via a wireless LAN. The NAT device's external interface is configured with a public IP address. The computers behind the router, on the other hand, are invisible to hosts on the Internet as they each communicate only with a private IP address. When configuring port forwarding, the network administrator sets aside one port number on the gateway for the exclusive use of communicating with a service in the private network, located on a specific host. External hosts must know this port number and the address of the gateway to communicate with the network-internal service. Often, the port numbers of well-known Internet services, such as port number 80 for web services (HTTP), are used in port forwarding, so that common Internet services may be implemented on hosts within private networks.

This article aims to provide concerned parties, such as customers, users, operators or consultants, with an overview of data privacy and protection related features of BVMS Person Identification. Moreover, this article describes how data, as processed during the Person Identification steps, can be classified. Finally, this article lists technical measures for data protection in the context of BVMS Person Identification.

This article explains how to find the source (details of the workstation) and credentials that are used to attempt to login into BVMS (when the attempt has failed)

This article explains the meaning of the arrows in circle at the central logical tree in the BVMS Operator Client list

The validity of the SMA date should cover the BVMS version release date you wish to upgrade to. Otherwise, the upgrade will not work and you will get the message "It is not possible to upgrade the software of this System Info file to a newer version". Also, please note that this message could occur in case you are trying to upgrade your BVMS and it is on the latest available version released.

Using the following command you can reset the result of People counting via SDK: http://<IP_address>/rcp.xml?command=0x0b4a&type=P_OCTET&direction=WRITE&num=1

According to the release note of the Video Security Client (page 3), you will notice that it is specified that the export of the mp4 video using the Video Security App on iOS or Android device is not possible, while for PC should work without issues.

This article contains the step-by-step guide related to the MP4 Video Export from Video Security Client to your PC (Windows) in a local directory. In this article, the Video Security Client is connected to the Remote Portal and explains how you can export video from cameras connected to your RP account.

The purpose of this article is to provide step by step instructions on how to successfully import video and storage devices from a DIVAR IP Recording Appliance to a BVMS standalone installation while retaining all existing recorded video.

The haneWIN DHCP server software implements a DHCP and BOOTP server based on RFC 2131. The DHCP Server is implemented as a native service for background operation, A Control Panel applet provides interactive access to the service. The server supports automatic DNS updates for DHCP configured clients. The latest version is available and can be downloaded from here. According to the Installation Manual of the DIVAR IP 7000/ 6000: All DIVAR IP systems are preconfigured with default network, user and iSCSI settings. By default, the virtual network adapter (the two physical NIC ports are teamed by default) is configured to obtain a valid network address from a DHCP server in the local network. The haneWIN DHCP server software supports multiple address pools for dynamic IP address assignment as well as fixed IP address assignment to clients.

Find out from this article what you should check when there is a black image of your camera in Operator Client when clicking on the Instant Playback

“Server is not online” message is displayed when accessing BVMS Operator Client. After clicking OK, the Operator Client is opening in a loop and never stops. What should you do?

This article explains what you can do when the ‘Stream limits’ parameter set in the webpage of FLEXIDOME multi 7000i camera is not visible in BVMS Configuration Client.

For all ONVIF, RTSP and JPEG cameras we only support one live stream, and for ONVIF you can only select which profile to use for this one live stream. 

Using the camera's Dropbox account when doing an export from the VSC app is not possible anymore with the newest version of FW.

"Error occurred when creating docker virtual machine. Refer to log for more info." Find out our recommendations from this article if  this message occurs

The attached documents show the different design options that are available when designing a BVMS system. For BVMS 10.1, we have extended the blueprints with Person Identification, the Access Management System, and updated the Enterprise overview.