This article explains how you can monitor the hardware health status of the DIVAR IP storage devices → Measure can be taken to repair the device if something fails.
The solution is via a workaround using an ATSL script in the encoder to re-set the COM port baud-rate upon a reboot/restart of the encoder (which should in normal practice not happen to often).
This article explains what to do if there is an unexpected shut down (e.g. instant power cut) and you have to apply the BVMS licenses again on your unit
This article explains where you can find the Camera Trainer for FLEXIDOME IP STARLIGHT 8000i camera and what settings are needed for CT to be displayed in Config Manager
Redundant network connection to a NetApp array can be configured with virtual interface. NetApp provides tree different types of virtual interfaces (VIF). Check this article and find more details!
If you want to change the time zone in the export, you need to add / subtract the difference (offset) to local time zone in post-processing e.g. in MS Excel or MS Access.
This article describes the method about how you can import a .txt file containing a group of cameras from Configuration Manager in Project Assistant App.
A DIP 5000 AIO is configured as a JBOD box and if one drive goes bad then you will have to replace that drive and all the data will be lost. Check this article and learn how you can add, replace or change HDDs in DIVAR IP 5000 AIO
