Security: Video

Does your camera show you the live view as in the image below? During day time (Color-Mode), the image is good, but as soon Night-Mode kicks-in and the IR-LED's turn on, the reflection is noticed.

The detection distance (based on the pre-defined requirements*) depends on the focal length and the size of the of the gun. 

In this article you will see how to import project files into Configuration Manager in both versions: v6.10 & v7.41  

If you have for e.g. a SNC-EM642R camera and you want to find out which device packs you need for your entire solution, follow the steps from this article.

Depending on the 3rd party cameras’ capabilities, there are different ways of adding cameras to Bosch Alarm Management.

This article lists the concrete instructions for collecting logs or other important information for issues with DIVAR IP. We will classify the different issue scenarios . Depending on the issue, this article lists the required logging to start the initial troubleshooting process.

Prior to receiving any type of support, the customer needs to be informed that he/she must have a valid SMA (Software Maintenance Agreement)

Check this article and find the compatibility matrix between Bosch cameras and Milestone

The package updates to the latest recovery image (app0), regardless of which app1 or former app0 firmware is running on any CPP4, 6, 7 or 7.3 platform.

This article describes how to connect with for example VLC-player directly to the Multicast group where the Encoder is streaming into.

When trying to open the SuperDoctor app, the default browser opening is Internet Explorer and the login page is not showing up. "This site is not secure" message occurs and there is no possibility to continue to the localhost.

The following steps have to be performed in order to use an updated software installation package on a DIVAR IP all-in-one 7000 3rd generation video management appliance.

If you have a DIVAR network/hybrid 2000/3000/5000 recorder and you want to connect and configure it, you can do it with the internet explorer compatibility mode in Microsoft Edge and you can use the system as before.

Depending on the FW version of cameras and BVMS version you have installed, different possible situations can occur such as: the cameras are not working because the firmware is old, Configuration Client will display a message like: "unknown platform", Gaps in recordings or not recording at all and so on

This article provides solution for Bosch PTZ camera & Genetec VMS when camera's image does not follow the correct field of view on the map.

This article answers the question:  Is there a search limit of results in BVMS Operator Client Logbook for collecting license plate data?

This article presents the the successor of VIDEOJET Decoder 7000 (VJD-7513). The replacement of it is F.01U.407.935 / VJD-7523.

This article shows how to reset the Sony Ipela HD (SNC-DH180) camera to the factory default settings.

This article provides causes and solutions if the Security Center crashes and is no longer operational - this may happen directly at launch or when you try to enable one of the plugins' tasks.

To set up certificate-based authentication with Bosch, you'll typically need to follow the steps from this article.