BVMS v10.1 and BVMS v11.0 come with a checkbox where you can logon to the Operator Client with Windows Credentials.
If you want to use this function, you need to set up the BVMS Configuration Client and browse the AD users-groups. Then, the users can sign in to Operator Client with their Windows-Credentials.
In order to increase system security in BVMS, it is recommended to set the Global CHAP password.
This article contains the configuration steps for an existing fully operational BVMS 11.x system with no CHAP password configured.
You can find it in the Configuration Client > Main window > Settings menu > Remote Access Settings... command > Show Port Mapping... button > Port Mapping Table dialog box
Port Mapping Table dialog box displays the port mapping for the IP addresses of the configured devices in your BVMS.
You can find here the private and public ports that are in use in the BVMS system.
Example:
Used ports:
All local ports that must be open on the computer where the server is installed or on the router/ level 3 switch that is connected to the server can be found in Help section (F1) from Configuration Client or you can see some useful examples, Q&A and specific cases in the following Knowledge Base article:
Which are the ports that must be open within a LAN for all BVMS components?
The purpose of this article is to provide the step-by-step process for replacing defective drive, rebuild RAID, create new iSCSI target, VHD and LUNs for DIP 7000 R2.
Find out from this article in which situations the MAC address cannot be found or only part of the address is correctly extracted in Project Assistant when scanning a QR or Data Matrix code
This article informs about improvements in firmware handling and new security mechanisms that help our customers to increase security related to firmware updates and IP camera protection.
This articles gives a short introduction to scripting alarm and counter tasks with Intelligent and Essential Video Analytics in FW 7.60. It also provides a broad selection of example scripts for explanation as well as including real world application examples.
Communication can get interrupted and configuraiton might fail if the below desribed actions are not performed. If your system is affected or not is described here as follows:
There can be authentication issues between the BVMS Central Server and the Video Recording Manager in case they are installed on different Servers.
It is possible to see reports at the BVMS 8.x system alarms that VRM reports wrong version
Please check in the VRM debug logging if the following logline indications can be found
This article summarizes the BVMS design details, and serves as a guide to planning a BVMS system with Bosch cameras and storage. It focuses on BVMS combined with the VRM.
The attached documents should help you to make the upgrade process as smooth as possible. The upgrade itself is not restricted to BVMS software only. The supported software and firmware versions can be found in the release notes of the related BVMS version.
Collection of FAQs for the Video IT Products DIP 6000 & 7000 R2, DIVAR IP AIO 5000/ 7000, DIVAR IP all-in-one 7000 (gen 3), DSA E2700 (EOL), DSA E2800, HP Workstations, HPE Servers
