Security: Video

This article describes how to secure the data connection between Bosch cameras and Milestone's XProtect by the use of 'Authority-signed Certificates' 

The DIVAR IP units are prepared from production to use at first setup the port 8454.

This article explains how you can set up a Virtual Assistant service in Bosch Alarm Management

Japanese characters in file names are displayed as garbled text after you decompress a .zip file in Windows 7 or in Windows Server 2008 R2.

You can collect Service logs from the unit using two methods. Both methods will save the service logs as a password protected ZIP file ( Example: ServiceLog-XXXXX.zip ).

You may have installed Configuration Manager on your PC, you tried to run it but the software no longer works. What could be the reason?

Find out here what could be the cause of the following message displayed on DIVAR IP 7000 R2: "The instruction at 0x6566f31c referenced memory at 0x00000008. The memory could not be read."

If you want to reinstall your unit with unconfigured HDDs and the RAID is not created yet, follow the steps from this article.

Divar 700 uses the concept where it assumes to be the (master) device to have control over the cameras and their streams.

Question   What to do when MIC IP camera is unable to perform the Object Classification in IVA detection?   Answer   Based on examples of target objects and non-target objects, the Camera Trainer program uses machine learning to allow the user to define objects of interest and generate detectors for them. Using Configuration Manager, you can configure the Camera Trainer program using both live video as well as recordings available through your MIC IP cameras. The camera also includes the latest release of Intelligent Video Analytics application for use on prepositions. Designed for mission-critical applications, the video analytics can reliably detect, track, and analyze moving objects while suppressing unwanted alarms from spurious sources in the image, even in harsh weather conditions. Advanced tasks like multiple line crossing, loitering, idle / removed object detection, crowd density estimation, occupancy and people counting are available for live alarming and forensic search. Object filters based on size, speed, direction, aspect ratio, and color can be defined. In order to perform Object Classification correctly, please make sure that you have correctly: set the correct Orientation     Save all the pre-positions again if the orientation stetting is changed calibrated the camera A simplified calibration mode reduces installation time significantly because you only need to enter the installation height once for each camera, independent of pre-positions. After the camera is calibrated, the analytics engine can automatically classify objects as upright person, car, bike, or truck.) enabled 3D tracking set it up the tasks and followed the VCA manual.   Please see an overview of object classification in the following article: How to set up object classification with video analytics

To be able to configure Customer Traffic Report service the Bosch IP camera needs to support Intelligent Video Analytics or Essential Video Analytics.

An object moving or a low/ higher contrast scene can throw off the autofocus option, resulting in a soft focus or even not focus at all. Using manual focus is an obvious solution, but manual focus isn’t exactly easy to get sharp images. Manual focus requires a bit of know-how and some practice to get right. If you would like to improve the performance and get a sharp image, please see below how you can manually adjust the focus ring on a Dinion Thermal camera.

Find out from this article what could be the causes of red cross displayed in Configuration Manager for MVS when connecting with iOS device

When entering in BVMS Operator Client, the camera's image is black and only Transcoding option is available for streams (no stream 1 or 2 , or image pane optimized) Desired result: See the camera's live image

Refer to this article if you are looking for what  default ports are used with Intelligent Insights

"An unexpcted error occured. Press F5 to go back to the operation mode selection page and retry. If the issue persist, contact technical support." Windows Server 2022, which is running on these machines is trying to contact their server, which in some cases (still being investigated why) is failing.  

If for any reason, later on the DIVAR IP needs to be removed from Bosch Remote Portal connected via System Manager, follow the steps from this article.

At startup, a black screen is showing up and it is impossible to boot into the BIOS or attempt a reset by pressing the F7 key. How to fix this?

If you add a decoder that has 2 monitors connected, you must display the Edit Decoder dialog box of the decoder and update the device capabilities of this decoder. For each monitor add a further monitor wall.

In this article, we will address the difference between Cloud Storage & Event alarm clip and what the customer is entitled to base on the licenses he had purchased.