Security: Video

Bosch Remote Portal release notes are a key resource for staying informed about the latest developments, maintaining security, ensuring compatibility, and optimizing the use of the portal. Subscribe on this article and stay up-to-date with the latest news!

By default the maximum number of shown results in the forensic search execution is 1000 and after 200 found results a warning message is shown. This article describes how to change those values.

The Virtual Assistant event is mapped to code 751 in the alarm transmitter. It is not possible to differentiate in the alarm transmitter the different scenarios on which an event code should be customized. The event properties sent from the Alarm Management application to the transmitter contains only if it's a VIRTUAL ASSISTANT or LIVE INTERVENTION etc.

Equipment should be mounted into a rack so that a hazardous condition does not arise due to uneven mechanical loading.

The field intersection trigger “edge of box” means the field alarms whenever any part of the object’s bounding box overlaps with the alarm field

This article aims to provide concerned parties, such as customers, users, operators or consultants, with an overview of data privacy and protection related features of BVMS Person Identification. Moreover, this article describes how data, as processed during the Person Identification steps, can be classified. Finally, this article lists technical measures for data protection in the context of BVMS Person Identification.

As video surveillance use grows in commercial, government and private use cases, the need for low-cost storage at scale is growing rapidly. BVMS, Bosch cameras, HPE hardware and SUSE Enterprise Storage provide a platform that is an ideal target for recording these streams.

NetApp® from time to time provides new HDD firmware for the various HDD / disk models. In January 2024 an NetApp Knowledge Base Article was created that needs to be taken into consideration as well.

Starting from July 2024, it will not be possible to commission new devices via MAC address (Device Layer). Running devices remain untouched until end of life of Device Layer, but new commissioning will be only possible with Remote Portal devices from then on.

The support of Bosch Site Monitor App for iOS and Android devices will end by 31 st  of June 2024. Bosch Video Security App will be the replacement, which is available in the Google Play Store as well as the Apple App Store for download.

The BVRAdmin password is a password for a Windows user and needs to be changed accordingly, from Windows settings. Please be aware that if you have BVMS installed on your DIVAR, it is important to change in BVMS Configuration Client the iSCSI target password after this was changed for BVRAdmin user.

Find out what to do when you enable SingleKey ID and you are no longer able to connect to Remote Portal using the password.

The information regarding the ports can be found in BVMS – Configuration Manual (page 366), should the customer use BVMS as a VMS.

The calibration can be done by using already recorded videos, as is demonstrated in the video below. Either video recorded on the camera's SD card or on a recorder can be used. This can save calibration time and can be done by a single person.

Bosch camera's passwords must be a minimum of 8 characters including special characters

Starting with BVMS 12.2, new OpenID Connect (OIDC) login options have been introduced. When closing the Operator Client, the user can decide to completely log off or stay logged-in.

Global VCA under the VCA task in Configuration Manager is used from default on the camera (with no specific configured VCA Rules). VCA Profile: Global (from Positioning) is used to set the same height of the camera for all VCA profiles.

The default behavior of VRM is to redirect requests from "HTTP" to "HTTPS" via the HSTS setting. Never change VRM or any device settings via CM if they are managed by BVMS - BVMS will revert the settings back to previous state as set in BVMS Cc

The inconsistency in the tamper detection functionality could be due to various factors. Follow this article for more details.

Yes. Since the system does not have a valid SMA, the Central Technical Support team cannot perform the license transfer from one unit to the other.