Security: Video

At some point of the troubleshooting process, the customers might be asked to force the VRM to do a full initial discovery.

Follow the steps below to manage adding & syncing your Dropbox account and share your projects from Project Assistant with your associates.

OPC server is installed on the BVMS server OPC client software is installed (the client used in this article is Softing OPC Toolbox Demo Client), and the user can connect to OPC server that is running on BVMS server, but the user cannot send any command from 3rd party OPC client to BVMS system, for example changing the status of virtual inputs. There are no events coming from OPC to BVMS and the OPC client is not present in the list for third party integrations with BVMS

One of the reason for this error when trying to access the VCA Tasks/ Metadata Generation could be generated because of the configured tasks which exceeded the Script Size limit (limit=2000 bytes) and metadata cannot be read.

In this scenario, an alarm button is connected to the Adam unit and when this input is activated (close or open), a full screen camera image shows on the display. The display is always logged in the Operator Client for live camera view on the DIVAR IP 7000 AIO.

Use the Project Assistant to its full extent and once the cameras are connected to the target network, perform a network scan using the BVMS Configuration Client

Log4j 1.2.17 is not actively used or called by the SQL Server or by the BVMS. This means that the vulnerabilities are not exploitable unless you install some additional components that refer to the vulnerable component. Therefore, there is no risk of exploitation within the SQL Server or BVMS environment.

We found that there was a change in the way intelligent tracking worked after CPP 7.3 firmware v7.62.0005. With these changes if an object triggered an alarm that turned on intelligent tracking, the camera would not track the object. It would wait for another object to trigger an alarm to track it.

This document is valid for all VideoView+ versions. Only the release notes of the latest VideoView+ version are fully updated and contain updates for earlier versions as well.

Bosch Remote Portal provides the VideoView+ Service which allows to display live video, replay of recorded video on the camera, and a forensic search on Video Security Client. Further the Video Security App (on iOS and Android) can receive push alarm notifications triggered by motion in the camera image, for example. This article explains how to configure this service to display live video, replay of recorded video on the camera, and forensic search on Video Security Client via your Remote Portal account.

This document is specifically for DIP-71xx as it's the DIP which supports certain versions of BVMS (regular BVMS installer) and must be updated in a certain order. The document details how to upgrade from BVMS v8 to BVMS v12.0.1.

Regular BVMS 12.1 installer will not run on any DIVAR IP all-in-one platform. The upgrade shall be performed via DIVAR IP System Manager application.

This document is specifically for DIP-73xx as it's the only DIP with Software Center. The document details how to upgrade all the way from BVMS 10.1 with Software Center and to BVMS 12.1/ 12.2 with System Manager 2.3 

Regular BVMS 12.1 installer will not run on any DIVAR IP all-in-one platform. The upgrade shall be performed via DIVAR IP System Manager application. Usually, we recommend to upgrade BVMS in steps. Each version should not be more than ~two years apart. This prevents potential issues in the upgrade process.

The Image Stabilization cannot be used in combination with VCA tasks, with the various MIC-7100i models. Turning Off the image stabilization will solve this behavior.

The internal logs are directly located in the folder C:\ProgramData\Bosch\VMS\Log and then are named like "CameoSdkLog_Instance1.txt.0".  To activate the Cameo SDK logging, the "Init" button has to be pressed after setting the checkbox "Internal logging" and entering an instance name - then logging is activated with the given instance name (e.g. "Instance1").

In the Logbook, you can search for particular events, alarms, devices, and strings of events.  You have the possibility to save the BVMS Operator Client alarm logbook, before accepting and clearing it.

Starting with BVMS version 12.0, the Privacy overlay feature was introduced. This feature can be configured to blur objects of type Person, based on a powerful Bosch Artificial Intelligence (AI) function

When trying to get the Software Assurance Report from Remote Portal, it cannot be generated, and the red message below occurs: “Upload a valid system info file or Enter a valid System fingerprint”. Why?

For years, we’ve provided a convenient way to view live videos from the Bosch Video Security Client via Remote Portal to complement our products. We’re delighted to share an enhanced service coming in April 2024. VideoView+ is a purchasable license that is simple and user-friendly to access your videos from anywhere.