Security: Video

The Intelligent Insights widgets can be visualized in BVMS Operator Client. In this article we are going to show you how to add a widget to Bosch Video Management System (BVMS).

BVMS OPC server restricts the use of some symbols in the camera names

Applicable when using the following software application. Bosch Video Management System (BVMS) version 10.0.1 and above. Bosch Configuration Manager version 7.0 and above. Live page on the web browser for IP camera operating on firmware version 7.70.0126 and above.

This feature is not available in BVMS 10.1. You cannot do it automatically for multiple cameras. You can do it one by one manually through Config Client.

Use the CTFID tool (Configuration Tool for Imaging Devices) for configuring the camera. Find in this article the download link and the release note.

The UDP tunneling cannot be configured on BRS. Network cards are grayed out.

This will let you call up cameras on an Allegiant monitor output across the network to a remote site.

Health monitoring with Remote System Management is very easy, as in one page you have an overview of the state of all DIVAR IPs connected to your Remote Portal and then, drilling down a level, you have an instant overview of the state of the cameras connected to the selected DIVAR IP. A service is available to setup health alerts for devices via email, so you are informed when any emergencies pop up.

This article explains how you can prevent the privacy mask from moving down and up when zooming in and out for AUTODOME and MIC cameras.

For years, we’ve provided a convenient way to view live videos from the Bosch Video Security Client via Remote Portal to complement our products. We’re delighted to share an enhanced service coming in April 2024. VideoView+ is a purchasable license that is simple and user-friendly to access your videos from anywhere.

This article provides a  solution  in case of memory leak on a Divar IP 7000 R2 triggered by Catalyst Control Center.

The purpose of this article is to help you disabling the compass character from the Screen Display (OSD) of the Bosch PTZ camera via its web interface

If you cannot access any program from kiosk mode or they are randomly opened on your DIVAR IP AIO, this happens because you double click on the icons.

Central Technical Support team may ask you to provide them with the logs from VIDEOJET decoder 7000 (VJD-7513). Follow this article and find out how to do this!

Follow the steps from this article to set up a Live Intervention service in Bosch Alarm Management.

This recommendation could be applied if the storage is overloaded, as there are several Onvif cameras running through it.

Place the script from this article in the alarm task editor and save it.

Perhaps you are wondering how to set the maximum retention time on a Divar Network? Some of our customers asked about this option. Well, in DIVAR Network and Hybrid there is not retention time. But you can set the automatically deleting time, that is more or less the same.   Step-by-step guide:   Open one Browser and type your device IP address Login with the administrator account Go to Settings > Storage > Recording Fill in the box with the desired automatic deletion time   Another option is to make this change directly in the local interface of the unit.

The article describes how to receive analytic events from Bosch cameras in Milestone XProtect.

This article is applicable for all the requests related to third party products integrated in Bosch Video Management System Software over ONVIF.