Security: Video

Find out from this article what could be the causes of red cross displayed in Configuration Manager for MVS when connecting with iOS device

This article shows available actions in Bosch Alarm Management and provides a step by step instruction to configure these actions.

‘Display stamping’ submenu has been moved from the General menu to the Camera menu.

If you add a decoder that has 2 monitors connected, you must display the Edit Decoder dialog box of the decoder and update the device capabilities of this decoder. For each monitor add a further monitor wall.

This article explains what to do if there is an unexpected shut down (e.g. instant power cut) and you have to apply the BVMS licenses again on your unit

Privacy masking is used to block a specific area of a scene from being viewed. Eight privacy mask areas can be defined.

When entering in BVMS Operator Client, the camera's image is black and only Transcoding option is available for streams (no stream 1 or 2 , or image pane optimized) Desired result: See the camera's live image

This article presents what are the limitations of Privacy overlay in BVMS 12 (Pano cameras, h.263 & MPEG, decoder, VSC).

In this article is explained step by step how to collect System Manager logs from your DIVAR IP all-in-one 4000 & 6000.

Starting on September 30th 2021, Dropbox™ has changed to short-lived access tokens, which expire after four hours. 

This article explains how to use the settings as per the devices current configured capabilities if you just added a device to BVMS, you get the possible stream options as per a “Config table” known to BVMS.

Find out from this article if there are restrictions of VRM Configuration utility pre-installed on DLA

At startup, a black screen is showing up and it is impossible to boot into the BIOS or attempt a reset by pressing the F7 key. How to fix this?

Follow the steps from this article and learn how you can create RAID 1 on your unit.

In this article, we will address the difference between Cloud Storage & Event alarm clip and what the customer is entitled to base on the licenses he had purchased.

In some cases the IVA tasks can get lost after firmware update, but you can avoid this by copying the IVA configuration. There are 2 ways. In both ways it's not guaranteed that all task shall work afterwards since new firmware version can contain a new IVA version with new features.

You can collect Service logs from the unit using two methods. Both methods will save the service logs as a password protected ZIP file ( Example: ServiceLog-XXXXX.zip ).

The privacy mask moves around with the image when the MIC IP starlight 7000 HD camera is in PTZ mode. The camera is integrated into a 3rd party Software.

This FAQ article explains whether it is possible to activate and use Alarm Out 1 or 2 via DIVAR Mobile Viewer App. One of the tests performed by Central Technical Support Team was on a DIVAR Hybrid 5000 with 6 outputs and they have used the latest firmware versions on DIVAR and cameras, so make sure you do the same.

This article illustrates how to avoid timeouts in the "jump to next"/"jump to previous" functionality for recordings in Bosch VMS Operator Client..