Security: Video

This article explains steb by step how to create the VCA fields for multiple presets in Configuration Manager.

This article provides an answer to the question: Can I restrict the live view or playback in VSC for certain cameras added in DIVAR hybrid 5000? Yes, you can restrict the live view or playback for certain cameras added in DIVAR hybrid 5000 for an user who is using Video Security App.

The minimum retention time is going to influence the amount of storage needed. The higher the minimum retention time, the more storage space is required. In this article we are going to show you how to add DIVAR IP 5000 EZ in My devices (Configuration Manager) and configure max & min retention time.

Starting on September 30th 2021, Dropbox™ has changed to short-lived access tokens, which expire after four hours. 

This article explains what to do if there is an unexpected shut down (e.g. instant power cut) and you have to apply the BVMS licenses again on your unit

The System Overview and Dashboard page shows all available data of your camera.  Find more useful information about FLEXIDOME multi 7000i camera from this article!

‘Display stamping’ submenu has been moved from the General menu to the Camera menu.

In some cases the IVA tasks can get lost after firmware update, but you can avoid this by copying the IVA configuration. There are 2 ways. In both ways it's not guaranteed that all task shall work afterwards since new firmware version can contain a new IVA version with new features.

The privacy mask moves around with the image when the MIC IP starlight 7000 HD camera is in PTZ mode. The camera is integrated into a 3rd party Software.

Let's suppose that the "Customer" user should see 3 cameras in the Video Security App. When logging to the App, he can see only 2 of them. Why?

This article explains where you can find the Camera Trainer for FLEXIDOME IP STARLIGHT 8000i camera and what settings are needed for CT to be displayed in Config Manager 

By design, the Dual-Recording feature is specific only in Bosch Cameras. 3rd party cameras are integrated into Bosch Systems like BVMS-VRM via our Video Streaming Gateway (VSG)

Privacy masking is used to block a specific area of a scene from being viewed. Eight privacy mask areas can be defined.

This article illustrates how to avoid timeouts in the "jump to next"/"jump to previous" functionality for recordings in Bosch VMS Operator Client..

You can try the steps explained in this article to create a Task using Task Scheduler from MS Windows

After a power outage/ reboot, all PTZ cameras will get back to their zero-point (home) position. If your PTZ camera was installed looking at a wall, in case of a power outage it will return to its home position where its image is pointing at the wall.

Follow this step-by-step guide and learn how you can ground the parapet mount for Bosch IP cameras & POE Midspan

The 95 W midspan is a high-power PoH (Power Over HDBase T) device that provides data and power between an Ethernet switch and an IP camera.

During the authentication process with Bosch cameras to a RADIUS server, the event “5400 Authentication failed” occurs. Find out from this article what you can do in this case.

Subscribe directly to this article (Option 1) or to the firmware_release_notification label (Option 2) and you will receive a notification in your inbox every time when a new Firmware is released and added to the list within this article.