The Embedded Login Firewall of all Bosch IP cameras, introduced with firmware version 6.30, consists of a two-level system which makes use of two integrated functional modules.
If your VIDEOJET decoder does not seem to work properly, most likely it is because the software (SW) version used is not compatible with the firmware (FW) version of your device.
Starting with BVMS 10.0, ONVIF encoder events can be retrieved from VSG or ONVIF encoder directly. Additionally to ONVIF profile S, BVMS 10.0 supports ONVIF profile T.
Our portfolio contains quite a variety of (mobile) video clients and applications. To get a fast first overview we created the attached table to compare the most important ones.
Camera Counter Reports are available on Bosch IP cameras capable of Essential Video Analytics or Intelligent Video Analytics, which are connected directly to the Remote Portal.
“Server is not online” message is displayed when accessing BVMS Operator Client. After clicking OK, the Operator Client is opening in a loop and never stops. What should you do?
Video Recording Manger v4.00.0070 does not allow anyone not configured in VRM, only as an admin (using Configuration Manager), to log into the VRM Monitor page.
The firewall configuration dialog is a fixed step in the setup process and will allow automatic configuration of all required firewall settings to run BVMS.
This article lists different ways to connect to cameras Live/Playback using the Video Security Client/App: to DIVAR IP AIO/BVMS system or to Camera directly, bypassing DIVAR IP AIO/BVMS system.
The System Info File is requested during the BVMS license activation via Remote Portal and can be downloaded by following the steps described in this article
This article explains how to find the source (details of the workstation) and credentials that are used to attempt to login into BVMS (when the attempt has failed)
Let’s suppose that you have one setup which consists in an Adam 6060 I/O module, BVMS and a DINION IP thermal 8000 camera. Can the state of an ADAM relay module be changed when the IVA from the camera generates an alarm?
