Security: Video

This article describes how to benchmark Video Analytics and differentiate video analytics solutions.

This article describes which camera settings influence the performance of Essential or Intelligent Video Analytics in Bosch IP cameras, and what the best practices are.

This article describes idle and removed object detection with Intelligent or Essential Video Analytics in FW 6.30, how to configure it and what the limitations are.

This article describes the camera tamper detection options available with FW 6.30: Scene too dark / bright, global change, reference image check.

The article describes how to track ships using Intelligent Video Analytics with FW 6.30, how to configure this and what the limitations are.

The museum mode of Intelligent and Essential Video Analytics is an optimized tracking mode to detect whenever someone tries to reach towards and touch a valuable asset like a museum exhibit. It can also be used in any other application where approaching a sterile zone from a more crowded environment shall be detected.

This article describes how to configure the Map-based calibration and Geolocation in different calibration methods

This article provides an overview of object classification, describes how to configure it and what the limitations are.

Never lose track of an object of interest! Intelligent Tracking automatically zooms in to and follows a selected Intelligent Video Analytics object as far as possible with the camera.

This article describes how to factory default a DIVAR IP 5000 Unit.

The Project Assistant offers two ways of importing existing project data Importing a .bpassist file or importing from a tab-separated text file

The attached documents should help you to make the upgrade process as smooth as possible. The upgrade itself is not restricted to BVMS software only. The supported software and firmware versions can be found in the release notes of the related BVMS version.

The Intelligent Insights widgets can be visualized in BVMS Operator Client. In this article we are going to show you how to add a widget to Bosch Video Management System (BVMS).

Central Support Team may ask you to provide them with the log files and configuration file of Intelligent Insights.This article explains you how and where you can get them.

The following procedure describes how to restore DIVAR IP 5000 ALL-IN-ONE to the factory default image.   Step-by-step guide   1. Start the unit and press F7 during the BIOS power-on-selftest. The Recovery menu is displayed.   2. Select one of the following: – Initial factory setup: restores to factory default image and deletes all data on the HDDs. or – System Recovery (back to Factory Defaults): restores to factory default image; data on the HDDs will not be deleted.   Note: While the System Recovery option doesn't delete video footage stored on the data HDDs, it still replaces the complete OS (operating system) partition (including VMS settings) with a default configuration. In order to access existing video footage after recovery, the VMS configuration needs to be exported before System Recovery and re-imported afterwards.   Notice! Do not turn off the unit during the process. This will damage the Recovery media.   3. The unit starts from the Recovery media. If the setup is successful, press OK to restart the system.   4. Windows performs the initial setup of the operating system. The unit restarts after Windows has completed the setup. 5. After the restart of the unit, the factory settings are installed. 6. After the system has reboot, the next step is to change the BVRAdmin password. The default one is WSS4Bosch.

Find out from this article how to pass a special connection string to request a multicast stream via RTSP from a BOSCH IP camera or IP encoder.

Please keep in mind that for SNMP v3 only the the Standard MIB II file is supported. This means that only general network device performance monitoring parameters can be requested. There is no Bosch Private MIB II extension for SNMP v3. 

A network management server can poll the health status of a device via SNMP requests. This article shows how to configure Bosch cameras in order to be able to answer to such requests.

The default Community Strings for Bosch cameras is - public. To change it, please follow the steps below.

This article describes all the steps that will help you to create iSCSI Virtual Disk/LUNs after replacing an HDD on a DIVAR IP 5000 AIO.