Security: Video

Hash Tag "#" is one of the few special characters, which is accepted by the camera, but it cannot be accepted on BVMS side (in order to connect to the camera) — due to the limitations of communication specifics some BVMS components are using. And as a result, communication might not work properly and "No connection" warning message in Operator Client image pane and black screen might occur

White cameo in BVMS Operator Client or "device failed" message may be caused by the NVIDIA graphic card driver that might not be compatible.

This behavior occurs when you have requested the SMA extension and you didn't upload the Activation file in the BVMS Configuration Client.

When integrating Intelligent Insights with a self-signed certificate, the BVMS operator client always shows an error message when opening a widget in the BVMS operator client image pane. Find out from this article how to solve this behavior!

If you forgot the password of your BVMS — Bosch Video Management System and you want to reset its password, the Central Technical Support Team can help you.

By extracting the playback in the MOV or MP4 format using BVMS Operator Client, the video is split into multiple files and not in a single file/ segment. This behavior became visible after upgrading BVMS to version 11.1.1.65.

The connection of 2N® Helios IP intercom to BVMS and Bosch Access Control System is possible thanks to the implementation of ONVIF and Wiegand protocols, which ensure mutual compatibility.

This article answers the question:  Is there a search limit of results in BVMS Operator Client Logbook for collecting license plate data?

Regular BVMS 12.0.1 installer will not run on any DIVAR IP all-in-one platform. The upgrade shall be performed via DIVAR IP System Manager application. Keep in mind: If you want the latest version of BVMS, it must be downloaded and applied with the latest version of System Manager.

Follow this article and download the Bosch Data Security Guidebooks attached

During the BVMS upgrade from v11.1.1 to v12.0 through System Manager v2.0 on the DIVAR IP 6000 AIO, the software file placed on an external drive is not visible to be installed. What could be the cause?

This article contains the list of Security Advisories (SA) to inform you about identified security vulnerabilities in our product or service and proposed solutions.

This article shows what to do in case the following message occurs: "Could not add the following devices"  when adding IP cameras FW 7.87  to BVMS 12.0.

In Bosch VMS it is possible to assign an LDAP user group to a Bosch VMS user group. This article describes why it is important to not assign the same LDAP user group to multiple Bosch VMS user groups.

The MG Camera Name and Number Setting (BVMS Configuration Client, under MG Camera Settings) was not designed for BVMS Operator Client cameo, but in fact for the CPP-Enc type of decoder like VJD-3000.

BVMS Configuration Client or Operator Client does not display correctly on the DIVAR IP 4000 AIO when opened from the Kiosk mode and appears oversized in fullscreen.

When logging into BVMS Operator Client, there is an alarm showing up: “System Error - Server alarm queue capacity reached”. Find out from this article what could be the cause and how to solve this.

You can lock the control of a PTZ camera for other users. A user with a higher priority can take over the control and lock the camera control. A timeout can be configured for this explicit PTZ locking. If you only take over the control without manually locking it before, the control is locked for the user with lower priority for 5 seconds.

The alarms appear, the forensic search is working fine, but the yellow lines don’t appear on the recording line/ timeline. What to do to display the yellow lines in timeline?

If you would like to exclude certain Events and Alarms from being written in the BVMS logbook you do have the option to exclude such information.