Security: Video

The attached documents from this article describe the exact functionality that BVMS system provides.

This article lists how to configure ANR feature in BVMS and how to set up correctly the iSCSI and direct replay. 

Starting with BVMS 11.0, the license activation is done via Bosch Remote Portal. A transfer of the license from the Bosch Software License Manager System (SLMS) to the Bosch Remote Portal is required for every BVMS system to be upgraded from 10.1 to 11.0

Whenever a central NTP Server is available the recommendation is to synchronize all cameras against the NTP central server.

This article explains how to enable and collect Video SDK Logs for VSDK based applications.

The "storage state failure" alarm doesn't always mean a recording error unless there is a gap at the time of the error for that camera that reported it. It is an error of the iSCSI protocol; it means that when the camera releases the connection for a certain block it has not received a response back from the iSCSI target in a certain time.

With BVMS 11.0, new licensing system was introduced. Attached document describes how to migrate existing activated BVMS licenses from the Bosch Software License Manager System (SLMS) licensing system to the new Bosch Remote Portal licensing.

This guide is meant to help you adding new cameras in VRM in Configuration Client and display their images in Operator Client.

In order to increase system security in BVMS, it is recommended to set the Global CHAP password. This article contains the configuration steps for an existing fully operational BVMS 11.x system with no CHAP password configured.

The purpose of this article is to provide step by step instructions on how to successfully import video and storage devices from a DIVAR IP Recording Appliance to a BVMS standalone installation while retaining all existing recorded video.

Find out from this article which VRM version is compatible with your DIP and what BVMS version is supported.

This step-by-step guide will help you to perform the upgrade of BVMS from v.10.1 to v.11.0 on a DIVAR IP 7000 AIO GEN 3 (DIP-7380-00N)

The VRM eXport wizard is a tool that allows you to export video directly from the VRM. This article describes how to use the VRM eXport Wizard. BVMS 10 comes with the VRM eXport Wizard 1.20.0016.

This article describes how you can upgrade a BVMS license to a higher version via Bosch Remote Portal. ( eg. from BVMS 11.0  to BVMS 11.1.x )

This article lists the initial troubleshooting steps and concrete instructions for collecting logging for issues with ONVIF cameras, added to BVMS system. We will classify the different issue scenarios one can have using ONVIF cameras in BVMS system. Depending on the issue the article lists the required logging to start initial troubleshooting.

This article provides the step-by-step procedure on how to configure “BVMS” presets and save views.

This article describes how Streamlining works and how it can be finetuned.

BVMS Operator Client has live issues (black image, the app closes by itself, pixelation of images, same camera shown in multiple cameos although it was only selected once, hibernation/power saving, part of the tree view seen in the Image Panes area). Follow this article and find out how you can check the basics for BVMS Operator Client live issues

The present document is intended to provide information on the VRM camera replacement functionality in the Bosch Video Management System (BVMS), as well as guidance through the process

This article explains step by step how to play exported recording files from VRM eXporter Wizard in BVMS Export Player.