Security: Video

This article contains the list of Security Advisories (SA) to inform you about identified security vulnerabilities in our product or service and proposed solutions.

This article lists the concrete instructions for collecting logs or other important information for issues with DIVAR IP. We will classify the different issue scenarios . Depending on the issue, this article lists the required logging to start the initial troubleshooting process.

This step-by-step guide will help you to perform the upgrade of BVMS from v.10.1 to v.11.0 on a DIVAR IP 7000 AIO GEN 3 (DIP-7380-00N)

The following steps have to be performed in order to use an updated software installation package on a DIVAR IP all-in-one 7000 3rd generation video management appliance.

The upgrade up to and including BVMS 11.1.1 should be done by using DIVAR IP Software Center packages. Upgrade from Software Center to DIVAR IP System Manager is required to further upgrade to BVMS 12.0.0 and higher using System Manager packages.

This article explains what action should be done for DIVAR IP 7000 Gen 3 before collecting IPMI logs

If you cannot access any program from kiosk mode or they are randomly opened on your DIVAR IP AIO, this happens because you double click on the icons.

At the initial setup of DIP 7000 AIO R3, when the Software Center has to be installed,  you might get the “Certification Check Failed” error message.

Follow the steps from this article and learn how you can create RAID 1 on your unit.

Follow this step-by-step guide and learn how to configure RAID 5 on your DIVAR IP AIO 7000 GEN3.