According to its Data Sheet, the Flexidome IP 3000i IR camera has 2 options to activate the alarm input.
Please refer to the diagram from this article if you would like to get alarm input from some physical sensors.
All Bosch IP cameras that are equipped with a Micro SD can record at the edge. While video recorded via Bosch’s proprietary iSCSI format is none readable, many sites require any type of recorded video to be encrypted.
After upgrading the camera firmware to version 7.81.0060 and higher, the camera display name become smaller in the font size. This is observed in CPP 6 and CPP 7 Bosch IP cameras.
This article gives you the solution to fix the behavior when the recording doesn't work for VG4 AutoDome camera and when the Bosch logo is displayed in the cameo
If you use the firmware files that are dedicated to a certain CPP platform, then you will need to select simultaneously only the cameras with the same CPP platform.
With fw7.70 a new feature was introduced that allows you to tune the scene for Day and Night separately using 2 custom scene modes.
This article explains how to switch the scene modes Custom mode#1 & Custom mode#2 based on Day or Night for Bosch cameras
The default SMTP port number for Bosch IP cameras is 25. The required SMTP port can differ depending on the service provider. From FW 5.80.0073 onwards it is possible to change the SMTP port using Alarm Task Script Language (ATSL).