Security: Video

If you use the firmware files that are dedicated to a certain CPP platform, then you will need to select simultaneously only the cameras with the same CPP platform.

The default SMTP port number for Bosch IP cameras is 25. The required SMTP port can differ depending on the service provider. From FW 5.80.0073 onwards it is possible to change the SMTP port using Alarm Task Script Language (ATSL).

Find out what to do if after connecting to Bosch Remote Portal using the Bosch Configuration Manager, the IP cameras are showing a red locked icon

The purpose of this article is to help you find the customer number and the material/ serial/ commercial type number of your Bosch device in different ways.

This article explains how you can restore Bosch IP cameras to the factory defaults and what changes are done after this action depending on the camera Firmware

This article will guide you to setup a App password usage from your Google account which you can use the generated password for Bosch IP camera alarm email notification setup.

This article will guide you to setup a App password usage from your Yahoo account which you can use the generated password for Bosch IP camera alarm email notification setup.

You have to make sure that you are not using HTTP. This is an insecure protocol and we recommended to disable HTTP because it will lead to vulnerability scan results.

Flexidome 8000i or other future cameras with WLAN option enabled (default ON) in an IPv6 network environment: no IPv4 possible. What to do?

Remote Connect service allows the Customer users to display cameras on Remote Portal Viewer on Video Security App and Video Security Client.

To be able to deploy a camera with DHCP disabled to Bosch Remote Portal, please perform the steps from this article.

Bosch has implemented the ONVIF Profile M with MQTT support in its cameras (CPP6, CPP7 and CPP7.3) in the firmware 7.81.0060 and above.

Want to know how flexible BVMS can assign streaming profiles to cameras?

This is the old way as for Project Assistant versions < 1.3.

This recommendation could be applied if the storage is overloaded, as there are several Onvif cameras running through it.

The method from this article shows you how to generate an updated certificate for Bosch IP Camera's and VRM Servers

Find out from this article how to pass a special connection string to request a multicast stream via RTSP from a BOSCH IP camera or IP encoder.

MTU stands for "Maximum Transmission Unit." MSS stands for "Maximum Segment Size"

This article explains how to integrate the Bosch MIC IP 7000 HD camera series into any existing analog CCTV system using the Bosch VIDEOJET decoder 3000. The most common integration scenarios are listed below: Simple integration using direct connectivity to analog monitor and joystick, typically found in single camera installation (for example, mobile surveillance vehicles) Integration into an existing analog matrix switcher typically found in large installations (such as for city surveillance)

An object moving or a low/ higher contrast scene can throw off the autofocus option, resulting in a soft focus or even not focus at all. Using manual focus is an obvious solution, but manual focus isn’t exactly easy to get sharp images. Manual focus requires a bit of know-how and some practice to get right. If you would like to improve the performance and get a sharp image, please see below how you can manually adjust the focus ring on a Dinion Thermal camera.