After upgrading the camera firmware to version 7.81.0060 and higher, the camera display name become smaller in the font size. This is observed in CPP 6 and CPP 7 Bosch IP cameras.
This article gives you the solution to fix the behavior when the recording doesn't work for VG4 AutoDome camera and when the Bosch logo is displayed in the cameo
If you use the firmware files that are dedicated to a certain CPP platform, then you will need to select simultaneously only the cameras with the same CPP platform.
This article explains how you can restore Bosch IP cameras to the factory defaults and what changes are done after this action depending on the camera Firmware
This article provides a background information about syslog, tips for 3 rd party Syslog server options and step by step instructions how to configure, activate and collect the syslog.
This article will guide you to setup a App password usage from your Yahoo account which you can use the generated password for Bosch IP camera alarm email notification setup.
Starting with firmware 7.10, an option to export from RAM recording buffer allows recording exports on the fly without requiring an SD card or external iSCSI storage.
This article will guide you to setup a App password usage from your Google account which you can use the generated password for Bosch IP camera alarm email notification setup.
You have to make sure that you are not using HTTP. This is an insecure protocol and we recommended to disable HTTP because it will lead to vulnerability scan results.
Based on the symptoms of no steaming video, a blank diagnostic log and the message below in the logs, there could be a few possible problems. These would be internal hardware issues.
The package updates to the latest recovery image (app0), regardless of which app1 or former app0 firmware is running on any CPP4, 6, 7 or 7.3 platform.