This article explains how enabling electronic image stabilization (EIS) on CPP14 cameras affect privacy masks.
As soon as the "electronic image stabilization" (EIS) is set to on, the image section changes slightly, which changes the placement of the privacy mask.
This article explains how to enable the blurring feature on the DINION 7100i IR camera. Available with firmware version 9.10.0192 or later, blurring can be activated through the camera’s configuration settings.
This article answers whether the DINION IP Starlight 7000 HD camera (NBN-73023-BA) can be set to corridor mode for narrow spaces like hallways and explains why this model doesn't support a 90-degree rotation setting.
Depending on the case, you can use the RS pins in various scenarios. If you wish to send information from the camera to an external device, you must use the Tx pins.
Find out how to install FLEXIDOME corner 7100i IR camera! The camera is corner-mounted, robust, and ligature-resistant, with a wide field of view that eliminates blind spots and produces high-quality images even in low light.
Follow this article if you have FLEXIDOME IP outdoor 5000i (FW 6.43.0027) or FLEXIDOME starlight 6000 VR (FW 6.32.0109) cameras and you would like to upgrade them to the latest version available
Please note that this recommendation might help, but cannot guarantee the high quality of the image. It depends on the camera FoV and the environment where the camera is installed.
In case you have noticed a gap between the left and right of the lens installation, this might cause improperly focus for the camera's image.
Therefore, please proceed as explained in this article.
