In case you have noticed a gap between the left and right of the lens installation, this might cause improperly focus for the camera's image.
Therefore, please proceed as explained in this article.
Please note that this recommendation might help, but cannot guarantee the high quality of the image. It depends on the camera FoV and the environment where the camera is installed.
Find out how to install FLEXIDOME corner 7100i IR camera! The camera is corner-mounted, robust, and ligature-resistant, with a wide field of view that eliminates blind spots and produces high-quality images even in low light.
Depending on the case, you can use the RS pins in various scenarios. If you wish to send information from the camera to an external device, you must use the Tx pins.
For bullet and dome cameras the clear window / bubble is generally made out of polycarbonate with a special hard coating to provide scratch resistance.
When the lens of FLEXIDOME 5100i camera is set to a higher tilt angle, you might encounter that the tilt is shifting when assembling the bubble, making it challenging to set a specific tilt angle to meet the desired Field of View (FoV).
"Show VCA items" is a function which works in Internet Explorer 11 with the Bosch MPEG ActiveX installed. Due the end-of-life of Internet Explorer, this function is no longer available on Microsoft Edge.
This article explains where you can find the Camera Trainer for FLEXIDOME IP STARLIGHT 8000i camera and what settings are needed for CT to be displayed in Config Manager
