Security: Video

This article explains what is IVA Pro Perimeter and what does 2D & 3D Tracking Parameters mean.

Follow the steps below to manage adding & syncing your Dropbox account and share your projects from Project Assistant with your associates.

Preventing condensation on security cameras is crucial because it can obstruct the camera's view, affecting its ability to capture clear footage. Over time, moisture build-up can potentially damage the internal components of the camera, affecting its functionality and lifespan

This article is a list for all cloud services and its associated devices or software including the required domains to allow them to properly operate on the network.

This article explains what is the difference between video coding H264 and H265 (Bosch cameras).

Find out from this article what to do if the System Overview of Bosch camera shows the Motor controller FW version as zeros

When integrating Intelligent Insights with a self-signed certificate, the BVMS operator client always shows an error message when opening a widget in the BVMS operator client image pane. Find out from this article how to solve this behavior!

Bosch camera's passwords must be a minimum of 8 characters including special characters

Have a look at this article and learn how to fix the Add Scriptlet button which does not become active. It stays grayed out. Same happens with ClientScript and ServerScript.

Find out from this article the steps that should be considered for a planned shutting down and powering up of your BVMS system

This is a Camera Trainer exercise that shows how you can Train the Camera for paper jam detection on the paper shredder.

Find out from this article what to do if the System Overview of Bosch camera shows the IR controller FW version as zeros

Find out from this article what to do if the System Overview of Bosch camera shows the SC or Camera controller FW version as zeros

The field intersection trigger “edge of box” means the field alarms whenever any part of the object’s bounding box overlaps with the alarm field

The calibration can be done by using already recorded videos, as is demonstrated in the video below. Either video recorded on the camera's SD card or on a recorder can be used. This can save calibration time and can be done by a single person.

This article explains in which conditions the users and Admin user receive Alarms in BVMS Operator Client.

The information regarding the ports can be found in BVMS – Configuration Manual (page 366), should the customer use BVMS as a VMS.

‘Status 11’ means that the wiper is blocked and cannot move freely or cannot move at all. Please check if the wiper is working properly and can move freely.

The maximum zoom speed in the GUI is operational but is only applicable during "manual control." When the operator calls for 30x, the zoom speed has to remain constant. While the speed may not be as rapid as anticipated, it is essential to understand that this camera model is already operating at its optimum capacity.

The configured camera TCP port is used from the BVMS Operator Client to the camera. This port is used by the BVMS Operator Client as a destination port. The source port is dynamic and therefore, it cannot be adjusted.