Security: Video

The field intersection trigger “edge of box” means the field alarms whenever any part of the object’s bounding box overlaps with the alarm field

The information regarding the ports can be found in BVMS – Configuration Manual (page 366), should the customer use BVMS as a VMS.

This article is a step-by-step guide about how to Import CSV device list into Config Manager.

This article contains the scriplet that on Input sends a RCPP command on Input to another camera to close its Relay 1.

This article is a step-by-step guide about how to update the BIOS on the DIVAR IP all-in-one 7000 4th gen (DIP-74xx).

Bosch camera's passwords must be a minimum of 8 characters including special characters

The inconsistency in the tamper detection functionality could be due to various factors. Follow this article for more details.

One of the reason for this error when trying to access the VCA Tasks/ Metadata Generation could be generated because of the configured tasks which exceeded the Script Size limit (limit=2000 bytes) and metadata cannot be read.

The maximum zoom speed in the GUI is operational but is only applicable during "manual control." When the operator calls for 30x, the zoom speed has to remain constant. While the speed may not be as rapid as anticipated, it is essential to understand that this camera model is already operating at its optimum capacity.

To find out the Windows version compatible with BVMS (Bosch Video Management System), you should consult the Release Letter. BVMS compatibility may vary depending on the specific version of BVMS you are using.

‘Status 11’ means that the wiper is blocked and cannot move freely or cannot move at all. Please check if the wiper is working properly and can move freely.

This is a Camera Trainer exercise that shows how you can Train the Camera for paper jam detection on the paper shredder.

Preventing condensation on security cameras is crucial because it can obstruct the camera's view, affecting its ability to capture clear footage. Over time, moisture build-up can potentially damage the internal components of the camera, affecting its functionality and lifespan

Find out from this article what to do if the System Overview of Bosch camera shows the Motor controller FW version as zeros

Have a look at this article and learn how to fix the Add Scriptlet button which does not become active. It stays grayed out. Same happens with ClientScript and ServerScript.

This article explain what to do if "The connection is not secure. Secure connection failed" message occurs in Configuration Manager.

The error message "Couldn't find a compatible Webview2 Runtime installation to host WebViews" might occur after installing the AI Alarm Verification Plug-in on a Milestone Husky system and attempting to log into Remote Portal in the Plug-in.

The way to get Metadata in Milestone is through the Bosch Enhanced Metadata Plug-in

When integrating Intelligent Insights with a self-signed certificate, the BVMS operator client always shows an error message when opening a widget in the BVMS operator client image pane. Find out from this article how to solve this behavior!

This article will help you to go directly to the technical articles related to a specific model of DIVAR IP, by using labels. Each Knowledge Base article contains relevant labels that relate to the DIVAR IP model for which you are searching for an article.