Security: Video

In this article can be found the solution regarding the black image of the ONVIF camera added in VSG in BVMS Operator Client.

This article provides causes and solutions regarding  the date and time indication inside the Image Panes  which are not visible in BVMS Operator Client.  

This article provides solution regarding 3rd party camera which is  added in VSG and is not displayed in the Device Tree from BVMS Configuration Client.

Answer This guide is meant to explain how you can find the connection state events of a camera in Operator Client - Bosch Video Management System.

HD Decoders are not downgrade-able lower than the factory default version. All Video Management Systems should not have issues with newer Firmware. All their implemented functions should work.

If the administrator account (which was originally created when initial setup wizard was run) has been deleted locally and another new administrator account was created, then it is not possible to create user via web. Only locally is possible, as the application is still looking for the original admin account.

Follow this article to find out what you should check and do if your 3rd party camera is flashing between image and Bosch logo in Operator Client

Since VRM 4.10, we have reintroduced the Live & Replay pages in the VRM web GUI.

This article describes the absolute minimum information we need in order to start analyzing and optimizing Video Analytics performance

It is only possible to configure a single time server per BVMS system to be used as time source for the VRM encoders.

This article presents how to find the Intelligent Insights version installed on my unit.  

If for any reason, later on the DIVAR IP needs to be removed from Bosch Remote Portal connected via System Manager, follow the steps from this article.

This article shows the blueprints for the three operation modes that the DIVAR IP supports, combined with Remote System Management. They show the capabilities and limitations of Remote System Management in each of the modes.

This article explains why cannot select the 1080 resolution in the dewarp mode of FLEXIDOME panoramic 5100i 12MP.

With the new VRM eXport Wizard, we offer the possibility to use CLI commands to do exports without needing to open the application.

This article describes how Streamlining works and how it can be finetuned.

BVMS v10.1 and  BVMS v11.0 come with a checkbox where you can logon to the Operator Client with Windows Credentials. If you want to use this function, you need to set up the BVMS Configuration Client and browse the AD users-groups. Then, the users can sign in to Operator Client with their Windows-Credentials. 

Before using the App please make sure that you have configured the Passwords, users and ports on your DIVAR and the same data is entered in the App.

Configuration Manager 7.60 by default will only trust CA signed certificates. Changing the security requirements will change the behavior of how CM displays the connection/access.

Have a look at this article and learn how to fix the Add Scriptlet button which does not become active. It stays grayed out. Same happens with ClientScript and ServerScript.