Security: Video

The "Import" icon may be missing from table view in Configuration Manager, version <7.50. Therefore, we recommend to update the Configuration Manager to v7.50

This article answer how the DIVAR network or hybrid UHD monitor setting cause black screen when UHD not supported After changing the resolution of monitor to UHD (3840*2160), the attached monitors results always black.

This only happens when you perform the export in BVMS Operator Client.

Please check which port and protocol have been set on the camera that has the live black image.

This behavior was improved with the release of Video Security Client/App 3.2.3.

This article explains how you can change the IP Matrix Passcode PIN when using Configuration Manager version lower than 7.50 & VIDEOJET decoder 7000 (VJD-7513) FW version lower than 10.22.

Use the keyboard connection on the back of the unit to connect a Bosch Intuikey keyboard using one of the following methods.

Network switch has port security on and shuts down a NetApp iSCSI data port (e.g. CH3). This article is only relevant in aspects of network security / port security where MAC addresses are analysed. Some network security applications are capable of sniffing network packets thoroughly enough to pick up MAC addresses on E-Series Controller ports that are not seen in the Storage Array Profile data.

This article provides a  solution  in case of memory leak on a Divar IP 7000 R2 triggered by Catalyst Control Center.

Japanese characters in file names are displayed as garbled text after you decompress a .zip file in Windows 7 or in Windows Server 2008 R2.

Find out from this article how can you avoid the MIC Inteox & Starlight 7100i camera wipers getting stuck.

This article will explain how to set-up the RAID quickly in order to start the "re-imaging" process from the Recovery DVD (one at DIVAR IP 6000 R2 - or two DVDs at DIVAR IP 7000 R2) enclose to each DIVAR IP 7000 R2 or DIVAR IP 6000 R2 delivery. 

Is DIVAR IP 6000 R1 compatible with VRM v.3.83.0021 (64-bit) and BVMS Viewer 10.1?

This article explains how you can change the relay mode back to automatic via a script executed when the relay open event is triggered.

Find out from this article which VRM version is compatible with your DIP and what BVMS version is supported.

Find out from this article how does the ‘Active profile’ work for Flexidome Multi 7000i camera

This article describes how to connect with for example VLC-player directly to the Multicast group where the Encoder is streaming into.

If cleaning the bubble is required, use the following procedures and comply with all the warnings listed in this article.

With fw7.70 a new feature was introduced that allows you to tune the scene for Day and Night separately using 2 custom scene modes. This article explains how to switch the scene modes Custom mode#1 & Custom mode#2 based on Day or Night for Bosch cameras

This article lists how to configure ANR feature in BVMS and how to set up correctly the iSCSI and direct replay.