Security: Video

NetApp® from time to time provides new HDD firmware for the various HDD / disk models. In January 2024 an NetApp Knowledge Base Article was created that needs to be taken into consideration as well.

The support of Bosch Site Monitor App for iOS and Android devices will end by 31 st  of June 2024. Bosch Video Security App will be the replacement, which is available in the Google Play Store as well as the Apple App Store for download.

This article explains you how and where you can get the logs of your camera. The system logs are extremely useful for troubleshooting recurring or obscure problems, as they provide a record of all work performed on the system and may shed light on hard-to-spot interactions between seemingly unrelated symptoms.  

Follow the steps from this article and find out how you can remotely view and collect the system's event log through IPMI (Intelligent Platform Management Interface).

Central Technical Support team may ask you to provide them with the logs from VIDEOJET decoder 7000 (VJD-7513). Follow this article and find out how to do this!

This article explains the most common way of gathering logs from a SONY camera.

Strange behaviors of the Divar IP 6000/7000 R2 start from a root cause that need to be found. Log files are the most comprehensive and help the Central Technical Support team to find it and provide you further assistance. This article provides you a step-by-step guide on how you can collect MegaRAID logs for DIVAR IP 6000/7000 R2.

You can collect Service logs from the unit using two methods. Both methods will save the service logs as a password protected ZIP file ( Example: ServiceLog-XXXXX.zip ).

This article explains what action should be done for DIVAR IP 7000 Gen 3 before collecting IPMI logs

This information may be requested by Central Support Team, as the bundle file is useful for troubleshooting the improper behavior of the unit. The method for collecting the NetApp DSA E2700 support bundle file is provided below.

This article explains how to enable and collect Video SDK Logs for VSDK based applications.

This article provides a background information about syslog, tips for 3 rd party Syslog server options and step by step instructions how to configure, activate and collect the syslog.

Use Bosch software and apps to connect remotely to your devices for configuration or maintenance simply by logging in with your Remote Portal account

This article lists the scenarios in which technical support normally request dump file from a BVMS system.

Follow the steps below from this article to collect the configuration data file and the maintenance log file that might be requested by Central Technical Support team for troubleshoot & support purposes.  

Starting with firmware 6.51.0026, clearing passwords was changed to only reset service user level password.

This guide is meant to explain how to enable the appropriate debug commands for logging during random reboot situations, and which logging to collect for troubleshooting, as in general there are multiple triggers that can cause a device to reboot. The information gathered will help to analyze the root cause.  Please make sure that all of the logs collected cover the same time period.

Bosch camera's passwords must be a minimum of 8 characters including special characters

Before requesting a password reset, please note that you need to provide some important information to the Central Technical Support Team to get help from them.

The BVRAdmin password is a password for a Windows user and needs to be changed accordingly, from Windows settings. Please be aware that if you have BVMS installed on your DIVAR, it is important to change in BVMS Configuration Client the iSCSI target password after this was changed for BVRAdmin user.