Security: Video

This article contains the Alarm Task Script for JPEG post to FTP every 30 minutes for Bosch IP encoders

The USB driver has a different letter than E:\ and DIVAR IP Software Center seems to look only in this root, in fact it doesn't find the new software.

Collection of FAQs for the Video IT Products DIP 6000 & 7000 R2, DIVAR IP AIO 5000/ 7000, DIVAR IP all-in-one 7000 (gen 3), DSA E2700 (EOL), DSA E2800, HP Workstations, HPE Servers

Related Products: Configuration Manager 7.00 and above. This article shows how to use recorded video in Configuration Manager in order to calibrate a camera and to configure a task.  

In Bosch VMS it is possible to assign an LDAP user group to a Bosch VMS user group. This article describes why it is important to not assign the same LDAP user group to multiple Bosch VMS user groups.

Use the project assistant to commission multi-camera projects and generate project reports. Available for Windows and iOS and Android. 

MegaRAID Storage Manager software automatically rebuilds the RAID 5 on a DIVAR IP unit without data loss. The rebuild is a fully automatic process, so it is not necessary to issue a Rebuild command. You can also monitor the progress of drive rebuilds. Once the chassis was replaced and the drives were mounted in drive carriers, follow this step-by-step guide in order to rebuild RAID 5 on a DIVAR IP.

Follow the steps below and find out how you can perform the Firmware Upgrade for multiple cameras in bulk

This article contains different Q&A regarding the Camera certificate in Config. Manager & WEB GUI: size limit, supported formats and limitations.

Prior to receiving any type of support, the customer needs to be informed that he/she must have a valid SMA (Software Maintenance Agreement)

This article describes the steps that are required to access the DIVAR IP 5000 AIO system from the internet.

The purpose of this article is to provide the step-by-step process of adding drives to a DIVAR IP 7000 R1 (DIP-7080-00N) Recording appliance and configure initial RAID setup on it.

This is an example on how to integrate 3rd party devices/software to trigger an event to take place on the encoder. 

This article explains how to playback the SD card recordings in Operator Client from a camera added as Local Storage in BVMS Lite 10.1

You can set-up your own webserver and host customer JPEG images yourself. You can find a warehouse example in this article, fully based on JPEG based static images.

If BVMS and VRM are installed on the same machine, it is needed to change the TCP Port of the VRM Monitor.

Check this article and find out what you can do if you are using one Divar network 2000 and you have a new Flexidome IP 5000i IR camera, but you cannot add it to the Divar because it is not displayed in “Detection” > “Device search” screen.

If the IPMI default password is lost, a tool called IPMICFG-Win, available from the SuperMicro website, can be used to recover it.

Follow the steps from this article to add a Bosch IP camera to the Alarm Management.

Follow the steps from this article when an error message appears on your DIVAR IP 5000 AIO during license activation process