Security: Video

The Cameo SDK is only backwards compatible, same as the Operator Client. According to the BVMS - Upgrade and Migration guides (boschsecurity.com)

When the VSG IP address needs to be changed, the old recordings will not be available

This article explains how to control access to restricted video in the BVMS Operator Client. Only users with the correct permissions can view restricted content, and access is managed via standard user groups on the Management Server.

This article answers the question: Can Bosch camera move with specific speed to a certain PAN & Tilt Position Coordinate (RCP command)? Moving at own defined speed can ONLY be done by • Send PAN/TILT coordinate separately + speed • Or use continues move+speed, followed by stop command. When using predefined presets, this ALWAYS happens at fastest speed.

This article explains how to  configure the KBD-Universal XF with Virtual Com Port or HID Joystick Mode.

Find out from this article the cause and possible solutions for status 4 and status 6 messages occurred on MIC IP FUSION 9000i camera.

This article explains how enabling electronic image stabilization (EIS) on CPP14 cameras affect privacy masks. As soon as the "electronic image stabilization" (EIS) is set to on, the image section changes slightly, which changes the placement of the privacy mask.

This issue typically arises when you have installed an incorrect version of BVMS.

You can export any single favorites item, folder or the complete favorites tree. You can then share the exported file or files with other users or upload it on your workstations.

It is not recommended to use a bridged NIC configuration for ONVIF cameras integrated in the VSG Server with BVMS.

Please note that this is not a bug, this behavior is as designed. Passwords are no longer stored in the config file. Therefore, a new password must be entered.

This article is a step-by-step guide on how to set focus position on MIC IP starlight 7100i camera (focus to a certain setpoint).  

This article answers whether the FLEXIDOME Multi 7000i camera consumes 4 licenses in BVMS. From BVMS 11.1 and newer version, the FLEXIDOME Multi 7000i camera is using only 1 license (including 4 channels). For BVMS lower than 11.1, then it will consume you 4 channel licenses.  

This article explains whether you can connect a MIC IP starlight 7100i camera to 5G devices with SDI output. Unfortunately, the MIC IP starlight 7100i doesn’t support SDI output, and currently, no adapter exists to convert its output to an SDI format.

This article explains what happen when all Accounts are removed from your Company in Alarm Management. You will not be able to create a new account at all. The Monitoring Center dropdown list doesn’t give you any option to be selected.

This article provides a list of the default administrator credentials for various Bosch DIVAR IP models, including those that require setting a password during the first configuration.

This article answer the question if DINION 5100i IR (NBE-5702) is supported by Milestone XProtect VMS. The Milestone Supported Device List shows the DINION 5100i IR (NBE-5702) camera as being supported with tested Firmware version 9.10.0192*.

This article present which could be de cause of ‘Unknown Error’ when trying to register DIVAR IP AIO to Remote Portal. After 15.02.2024 the minimum version for all the DIVAR IP AIO family system supported to connect to Remote Portal is 2.3.0.  

This article explains whether it is possible to change the default email SMTP port on BVMS when using SSL or TLS.

This article explains which driver should be used for Bosch cameras with Genetec Security Center? Legacy Driver Designed for Bosch cameras operating on the CPP-7.3 platform or older. This driver ensures compatibility with legacy devices. Hybrid Driver "Others (CPP13 and newer) Designed for Bosch cameras on the CPP-13, CPP-14 platforms, or newer. This driver fully supports the advanced functionality of newer Bosch cameras, providing improved UX and enhanced feature.