Security: Video

In this article you will find attached an example of scriplet that turns BVMS Operator Clien in full screen mode and creates and displays a simple favorites of one camera

Configure BVMS Operator Client credentials, so the application starts without requesting username and password and add the shortcut path of the BVMS OC to the Windows start up directory

MVS gets error message “Videoprovider not available” when trying to log on. Also, the BVMS Configuration Client shows the X mark on the MVS. What to do?

To find out the Windows version compatible with BVMS (Bosch Video Management System), you should consult the Release Letter. BVMS compatibility may vary depending on the specific version of BVMS you are using.

Perform an update in the BVMS setting to pull h265 and the recording should start to show up in the playback cameo from BVMS Operator Client

This articles describes how a BVMS system meets the requirements specified by IEC62676-1.

Find out from this article what you should do to fix green Image panes in BVMS

This behavior is mentioned in the release notes and as a workaround you can separate the cameras into different groups. For example, if you have cameras in 2 different locations, it would be actually better to separate the cameras in 2 groups. But please be informed that by doing so, you will not be allowed to view them all together.

Forensic search is a way of searching your recorded video for events that have happened in the past using the metadata that the camera has generated. You can use the metadata embedded in the video to reverse the process and search for events using the same or different tasks that VA provide. But, do you know what is the difference between individual & common search?

New menu option "Import from csv file" available when right clicking on a VRM pool within the Device Tree of the Configuration Client. The option is not offered for Live only or Local storage cameras. 

Unsupported camera model: Auto-calibration is currently not supported for this camera model. Calibration could produce wrong results or might not work. Why is this message displayed in Configuration Manager?

Welcome to the 3.5 release of Video Security for Windows, Android and iOS. There are new features in this release, some of the highlights are explained within this article.

Please configure the same time zone on the PC, download the Remote Portal activation file again and then you will be able to load it into Config Client and license the system.

This article contains the information about the default path where  the recordings of Bosch Video Client are set.

BVMS OPC server restricts the use of some symbols in the camera names

You should only subscribe directly to this article (Option 1) or to the software_release_notification label (Option 2) and you will receive a notification in your inbox every time when a new Software version is released and added to the lists within this article.

Starting with BVMS v10.0, you can leverage VRM Encryption Technology.

Glutton (German: Vielfraß) defines and prevents a camera or multi-channel encoder from mounting and consuming  a large number of  blocks in a very short time.

If replacing a defective camera, the camera must be the same IP address as the defective device, and it cannot contain a GUID from a different VRM.

The configured camera TCP port is used from the BVMS Operator Client to the camera. This port is used by the BVMS Operator Client as a destination port. The source port is dynamic and therefore, it cannot be adjusted.