Combined firmware package 6.60 – applicable to all platforms
The Release Letter of the combined firmware package for all platforms 6.60.1321 provides information about the dependencies between firmware versions for a better understanding of the upgrade process of devices with older firmware.
CCP4 and CPP6 devices:
Due to an internal file system being introduced to CPP4 and CPP6 since firmware 6.10 and architectural changes thereof, a direct upgrade from firmware below version 6.10 to latest firmware is only possible via intermediate firmware 6.1x.
CPP4 cameras with firmware versions below 6.10 need to upload this package twice. For example, when having firmware 5.92 on a CPP4 device, you need to load the CPP all common firmware file two times: > First time this is loaded the device will be updated to the 6.11.0021 which is part of the common file. > Second time you load the common firmware file, the update to 06.50.0128 will be performed.
CPP6 cameras with firmware versions below 6.10 need to upload the separate firmware version 6.1x first to receive the latest firmware version. This means that intermediate firmware version 6.1x for CPP6 needs to be requested from your technical support. A support ticket to Level 3 team at MKP PRM group via the support ticket system is needed. In case we see a high demand for that a new combined firmware file might be created by PRM. Only after receiving and uploading firmware 6.1x, you can upload combined firmware package for all platforms 6.50.0620 or CPP6 specific firmware 6.50.0128.
This combined firmware cannot be applied to CPP5 products with firmware version older than 5.91. It is required to upgrade to intermediate firmware 5.91 first
This means that intermediate firmware version 5.91 for CPP5 needs to be requested from your technical support. Only after receiving and uploading firmware 5.91, you can upload combined firmware package for all platforms e.g. 6.50.0620 or CPP5 specific firmware 6.30.0059. To find a combined firmware file in the downloadstore you can use the folowing URL syntax: https://downloadstore.boschsecurity.com/index.php?type=fw&filter=CPP
or you use the CPP 6.50 combined file here: https://downloadstore.boschsecurity.com/FILES/KnowledgeBase/CPP_FW_6.50.0620.fw
and Releaseletter of that combined firmware package: https://downloadstore.boschsecurity.com/FILES/KnowledgeBase/Bosch_Releaseletter_CPP_FW_6.50.0620.pdf
Note: Upgrading from versions lower than 5.5x
To upgrade to a newer firmware version using this combined firmware package, firmware versions before 5.5x require an intermediate update cycle using the respective platform firmware version mentioned above.
This firmware and its included platform firmware builds are not applicable to MPEG-4 products.
The final firmware version for VIP-X1600-XFM4 modules is FW 5.53. No newer firmware will be provided for these modules.
Configuration Manager cannot upload this Combined Firmware file to VIP-X1600-XFM4 modules. Use the module’s web page instead for uploading; or use the separate firmware file.
The final firmware version for CPP3 devices is FW 5.74. No newer firmware will be provided for these products.
The Combined Firmware file does not load onto VG4 AUTODOME or AUTODOME Easy II via the browser when running a firmware version before 5.52.0017. The specific platform file should be used instead.
(Note: In case any link might not work to the current DownloadStore, see attached a copy PDF of the Release Letter.)
How to get and request a BOSCH Legacy Firmware:
The procedure to request and get an legacy firmware that is no longer online in the web is as follows:
Customers are kindly requested to reach out to the local BOSCH Support (L1 and L2 team).
Bosch Level 2 will ask for the exact BOSCH Commercial Type Number (CTN). The local BOSCH team can check the Global End of service date. The project background (How many of these devices/cameras) need to be collected.
The relevant BOSCH Technical Support (e.g. Level 2) can explain and check if there is the chance to update the project and included management software in order to be able to use the latest BOSCH device firmware as the goal is to have a non-vulnerable product in productive environments.
In case there is no newer firmware available (hardware was discontinued), a commercial hardware upsell can be recommended.
In general all firmware that is not available on the product catalog, and for all firmware files that are ranked to have vulnerabilities, this need to be documented in a Technical Support case.
In case legacy firmware is anyhow needed and requested by our customers, the Bosch Technical support will start an approval flow. The BOSCH Level 3 Technical Support will provide a form/document that must be signed by the installer/endcustomer. See an example PDF (empty) "Example_Aged_Software_Release_form.pdf" attached to this article. Such a form will be prepared by the BOSCH Level 3 Technical support team and provided to our customer/installer in order to confirm that legacy firmware is then used on the risk of the installer and customer (See text and legal note in the PDF). In the future BOSCH plan to introduce and setup a self-service portal for all customers to simplify this process.
The above mentioned combined firmware 6.50 supports:
CPP7.3 HD and UHD cameras update from FW 6.40 or newer to latest FW 6.50
CPP7 UHD cameras update from FW 6.30 or newer to latest FW 6.50
CPP6 UHD cameras update from FW 6.10 or newer to latest FW 6.50
CPP5 encoders update from FW 5.91 or newer to latest FW 6.30
CPP4 HD cameras update from FW < 6.10 to intermediate FW 6.11 update from FW 6.10 or newer to latest FW 6.50
CPP3 cameras and encoders update from FW 4.54.0026 or newer to latest FW 5.74
CPP-ENC VIP-X1600-XFM4 encoders: update from FW 4.2x or newer to latest FW 5.53 VJT XF and VJD-3000 update to latest FW 5.97
The combined firmware package includes the following build versions:
CPP7.3 FW 6.50.0128
CPP7 H.264 6.50.0128
CPP6 H.264 6.50.0128
CPP5 H.264 6.30.0059
CPP4 H.264 6.50.0128
CPP4 H.264 6.11.0021
CPP3 H.264 5.74.0010
CPP-ENC H.264 5.97.0005 for VJT XF family, VJD-3000 and VJC-7000
CPP-ENC H.264 5.53.0004 for VIP X1600 XFM4
For detailed description please refer to the separate release letters.
Customers can upload such combined firmware packages by using multi-select in the Configuration tool "BOSCH Configuration Manager" (currently available in version 06.01.0157 at the BOSCH DownloadStore or Product catalog > Video Software > Video Management Systems > Configuration Manager)
When using the multi-select option in Configuration Manager, please make sure this combined firmware package for all platforms can be uploaded to all the devices selected and there are no additional requirements or intermediate steps needed for any of the devices in question.
This article has status of 31st of October 2018 and changes in this procedure might be introduced. When changes are done, then this article will be updated. Therefore check this article from time to time.
In all VRM installation packages the required .NET framework package is included in the VRM installation routine.
As Microsoft Operating Systems are expected to get and have the latest security updates applied before installing any new software component like VRM (Video Recording Manger) or VSG (Video Streaming Gateway), the installer will successfully finish the installation routine. The same is valid for BOSCH DIVAR IP product range: The DIVAR IP Appliance installer contains Microsoft update packages available from Microsoft at the time BOSCH creates the Appliance installer. But all Microsoft Updates release after the Appliance installer release date are not included in the BOSCH package. It is therefore recommended to check for Microsoft updates whenever a Bosch DIVAR IP Appliance installer is installed.
For VRM (Video Recording Manager) stand-alone Systems and Servers with VSG (Video Streaming Gateway) installed, it is also strongly recommended to check for Microsoft OS updates before the VRM Master Installer is installed/updated.
Note: In case an error code 5100 is shown during the VRM Software installation, please ensure that all Microsoft updates for the used Operating Systems are installed and run the BOSCH Software installer after that once again. For more details Microsoft provides more informaiton here: https://blogs.msdn.microsoft.com/astebner/2008/10/13/net-framework-setup-verification-tool-users-guide/
For older BVMS and VRM installations please also refer to the following previous article:
The attached document aims to provide concerned parties, such as customers, users, operators or consultants, with an overview of data privacy and protection related features of BVMS Person Identification. Moreover, this document describes how data, as processed during the Person Identification steps, can be classified. Finally, this document lists technical measures for data protection in the context of BVMS Person Identification.
What's new or fixed in Project Assistant 1.2.2?
Next to general stability improvements and bug fixes, version 1.2.2 of the Project Assistant introduces the following new feature on all three platforms: Allow re-configuration of a camera, e.g. wirelessly adjust the field of view of a FLEXIDOME IP starlight 8000i , while local recording is running. One bug fix worth mentioning explicitly is that we addressed a connectivity issue, which was faced, when connecting wirelessly to multiple FLEXIDOME IP starlight 8000i cameras one after another.
We have published a new Excel template file that makes the import of existing information into the Project Assistant even easier. Feel free to check out the updated Knowledge Base article.
Further information can be found in the release letter attached.
Your Project Assistant Team!
BVMS Lite is a BVMS edition which can be downloaded and activated free-of-charge. How can I set-up a basic (live and recorded video) BVMS Lite system?
First, you need to download the software package, active the BVMS Lite license and install the software. This is described in this article: BVMS - Activating a license.
Second, you need to prepare an iSCSI environment which is suitable for recording video. Any Windows Server based operating system will do. This is described in this article: BVMS - Configuring a Microsoft iSCSI target.
Last, you need to add cameras to the system and start the recording. This is described in this youtube video: How to add a new camera using Configuration Client (BVMS).
Now, have a look at the Operator Client quick guide and you're ready to go!
Where can I get more information on advanced functionality?
Once the software (configuration client or operator client) is running you can press F1 at any time to open the embedded software help! All of the advanced functionality BVMS offers is explained in the help files.
The Bosch VRM Monitor page does not open correctly, but instead displays an Error.
Any Replay client requesting video from the Bosch Video Recording Manager service, only receives the Time-Line but the video is alway Black.
Bosch VRM by default uses Ports 80 & 443.
In most cases the problem is caused by another web server (e.g. IIS) that is installed on the same machine and is also making use of the default web ports 80 & 443.
Bosch Video Recording Manager (VRM)
Bosch Video Managment System (BVMS)
Bosch Video Client (BVC)
Bosch Video Security Client (VSC)
Any Replay Client/ Managment System which accesses recorded video data via HTTP/HTTPS
Disable any of the other web services or change the default Ports they are using.
Bosch software is distributed via the Bosch website, but can also be re-distributed by Bosch partners. It is important for the system-installer to check if the installation file he or she has received, matches exactly with the output of the engineering process. There are several risks that, in the distribution path, changes are made to the installation file. Keyloggers or other spyware could be added to the installation, or in theory video surveillance footage could be routed to external resources.
The attached document describes how the integrity of software can be checked.
How can I combine a ISS SecureOS Auto system (providing ANPR functionality) with a BVMS system?
The attached document describes the steps how to configure BVMS and the ISS SecureOS Auto system for achieving watchlist ANPR alarms and recorded ANPR detections into the BVMS logbook.
What's new in version 1.2?
Next to general stability improvements and bug fixes, version 1.2 of the Project Assistant introduces the following new features:
Support of Flexidome IP 8000i Wi-Fi camera with regard to wireless commissioning
.txt file import now supports tags to be somewhere in the column header, e.g. “IP address [ip]”, where for version 1.1 only the [ip] tag was allowed in the column header exclusively
Software sealing support for cameras with firmware 6.60+
Extended report information
Project Assistant project file import functionality in Configuration Manager 6.10
Bosch portable camera installation tool is available and can be used in combination with the Project Assistant (check out the corresponding how-to video in this community)
PS: For detailed information, please refer to the release letter attached.
Version 1.2.1 has been released for iOS only. It resolves an issue when trying to connect wirelessly to a FLEXIDOME IP 8000i camera. There was an issue where the operating system blocked the Wi-Fi access.
For larger projects, where many cameras need to be commissioned, the question might come up on how to tackle it in the most efficient way using the Project Assistant. In the end, a Project Assistant file can comprise up to 500 cameras. Especially if multiple contributors perform the commissioning step in parallel, you need an appropriate approach.
For visualization reasons, let's use a simple example. Let's imagine we have a project that comprises 500 new cameras in total. 250 cameras for building A and another 250 cameras for building B.
Here are two options:
Creating multiple (sub-) projects and merge them in Configuation Manager If you cannot use Dropbox for synchronisation via the cloud, you can simply create 2 projects - one for building A and one for building B. Both projects can be prepared ahead of time, e.g. in the office, and exported in order to share them. Sharing the exported as well as encrypted project files can be done via E-mail, thumb drive, any of the major cloud storage services, etc.*. Now let's assume that there is one contributor working on building A and one working on building B. After each contributor has commissioned his or her 250 cameras each, they can themselves export the project files. To re-combine or merge both sub-projects, we have introduced a Project Assistant project file import feature in our Bosch Configuration Manager 6.10. This feature allows you to conveniently import multiple project files at once and to easily integrate them into your existing system structure. Please, check out the corresponding "How to import project files into Configuration Manager 6.10" article in this community. * Restrictions due to project file size might apply depending on the sharing medium. The synchronization functionality is only available for Dropbox.
Using the Dropbox Synchronization feature This feature let's you plan and preprare a project ahead of time, e.g. in the office, which can then be shared via Dropbox with multiple other contributors as needed. That means everyone that was "invited" to work on this project has access to the same project file, where there is only one "master" version residing in the cloud that is accessed and synchronized via Dropbox. Consequently, you can avoid managing multiple versions of the same project file. Therefore, depending on the internet connectivity of all contributor's devices, you can see the real-time progress of the project, no matter if you are in building A, building B or even in the office. All updates to the project are immediately synced via Dropbox among all contributors. If you want to know how to setup it up, please check out the following videos:
Of course, the Project Assistant project file import feature in our Bosch Configuration Manager 6.10 is also available for futher configuration and system integration for this option, as well.
What's new in version 1.3.1?
Dear users, thank you for working with the Bosch Project Assistant. Based on your feedback, we have introduced the following improvements and features to make its use even more effective and enjoyable: • Sorting option on project overview page • Easier and faster removal of cameras from a project • Time server support • Re-commissioning support for VRM-managed cameras (focus on Flexidome IP 8000i) • Configuration mismatch (between project/app and camera) resolution dialog • Integration of Bosch Portable camera installation tool (NPD-3001-WAP), i.e. automatic detection of its wireless access point, management of multiple tools, and configuration of the tool’s network settings within the app
Please check out the updated article " How-to: connect to and configure the portable camera installation tool ". Here we have added new videos that help you to get started and which explain the sepcifics of the different platforms - iOS, Android and Windows.
Your Bosch Security App Team
PS: For details, please have a look at the latest release letter in our Bosch Security Download Area.
As video surveillance use grows in commercial, government and private use cases, the need for low-cost storage at scale is growing rapidly. BVMS, Bosch cameras, HPE hardware and SUSE Enterprise Storage provide a platform that is an ideal target for recording these streams.
There are numerous difficulties around storing unstructured video surveillance data at massive scale. Video surveillance data tends to be written only once or become stagnant over time. This stale data takes up valuable space on expensive block and file storage, and yet needs to be available in seconds. With this massive scale, the difficulty of keeping all the data safe and available is also growing. Many existing storage solutions are a challenge to manage and control at such scale. Management silos and user interface limitations make it harder to deploy new storage into business infrastructure.
The solution is software-defined storage (SDS). This is a storage system that delivers a full suite of persistent storage services via an autonomous software stack that can run on an industry standard, commodity hardware platform. Bosch, Hewlett Packard Enterprise (HPE) and SUSE have partnered to deliver the benefits of SDS to the video surveillance industry. Using SUSE Enterprise Storage™ on HPE ProLiant DL and Apollo servers in a Bosch video surveillance environment simplifies the management of today’s volume of data, and provides the flexibility to scale for all enterprise storage needs.
The full description can be found in the attached whitepaper.
Compared to hardware, in which it is relatively easy to define an end-of-support concept based on the expected lifetime, software behaves totally different. In theory, when the environment does not change, software can still be running ten years after it has been installed. As new versions of the software are released regularly, it is important for customers to know what they can expect from Bosch Building Technologies when the software is purchased. This document describes how Bosch Building Technologies handles the life-cycle of the BVMS, BIS, AMS, and APE, and in which state a specific release can reside. Additionally this document lists the up-to-date situation for all of those software packages.