Security: Video

This article contains a step-by-step guide from which you can learn how to change the video stream of a camera in Bosch Video Security Client

This article explain step by step how to upgrade the firmware for multiple cameras (bulk) at the same time in Configuration Manager.

This article explains why the Live view shows ‘Authentication failed’ in Video Security App.

This article presents possible causes and solution regarding no recording for cameras added to VRM (DIP 7000AIO): ‘Unexpected error’ in BVMS Config Client

Video Security Client is the market’s easy to use video surveillance application provided by Bosch for local and remote monitoring of IP cameras and appliances. The software supports small systems from 1 to 128 sites with up to 256 cameras each. Also, you can use Video Security Client being connected to your Remote Portal account. Follow this article and find out the limitations and how can you connect your Remote Portal account to Video Security Client.

This article contains the information about the default path where  the recordings of Bosch Video Client are set.

.NET Framework is the original implementation of .NET. It supports running websites, services, desktop apps, and more on Windows. The system requirements for Configuration Manager state .NET 4.7.2 as necessary to be installed. Configuration Manager v7.30 installation package does not provide .NET Framework 4.7.2.

The Intelligent Insights widgets can be visualized in BVMS Operator Client. In this article we are going to show you how to add a widget to Bosch Video Management System (BVMS).

Is DIVAR IP 6000 R1 compatible with VRM v.3.83.0021 (64-bit) and BVMS Viewer 10.1?

This article mentioned which ports does Configuration Manager use for devices searching. The RCP+ discovery port for Bosch cameras, encoder and decoders is port 1800.

This article explains how to configure an alarm communication between BVMS and Gmail e-mail address.

Intelligent Insights support controlling Bosch IP cameras by Common Gateway Interface (CGI) commands over HTTP or HTTPS when a threshold of the area fill level, area fill level traffic light or occupancy use case is reached. Follow the step-by-step guide below and find how you can to setup the threshold actions in Intelligent Insights.

This feature is not available in BVMS 10.1. You cannot do it automatically for multiple cameras. You can do it one by one manually through Config Client.

Check this article and find out if you can add and see a BVMS 11 system running on a DIP in MVS webpage as unmanaged site

This article explains how to configure a single camera that already has a fixed IP address assigned, using Project Assistant App.

This article is a step-by-step guide about Video View License activation process.

Configuration Manager 7.60 by default will only trust CA signed certificates. Changing the security requirements will change the behavior of how CM displays the connection/access.

The "Import" icon may be missing from table view in Configuration Manager, version <7.50. Therefore, we recommend to update the Configuration Manager to v7.50

This article explains what you can do when the message:“The number of windows in this view exceeds the maximum limit set in the system parameters” appears in Operator Client with minimum 2 Monitors.

This article contains a simplified and generalized example, that could be helpful in building a particular tailored script related to implementation of event receiver in BVMS SDK scriplet.