Security: Video

Applicable when using the following software application. Bosch Video Management System (BVMS) version 10.0.1 and above. Bosch Configuration Manager version 7.0 and above. Live page on the web browser for IP camera operating on firmware version 7.70.0126 and above.

This article describes how to count with Bosch Video Analytics with How to Video and a Technical Note on the topic.

This article contains detailed technical description of Intrusion Detection, set up guidance for different usage scenarios and best practices. It is useful to get in depth knowledge about Intrusion detection or to find the answer of frequently asked questions.  

Different devices, whether cameras or encoders, offer a different amount of processing power for video content analysis (VCA).

This technical note summarized the different integration possibilities available today and the clients supplied by Bosch.

This article describes how to benchmark Video Analytics and differentiate video analytics solutions.

This article describes idle and removed object detection with Intelligent or Essential Video Analytics in FW 6.30, how to configure it and what the limitations are.

The article describes how to track ships using Intelligent Video Analytics with FW 6.30, how to configure this and what the limitations are.

The museum mode of Intelligent and Essential Video Analytics is an optimized tracking mode to detect whenever someone tries to reach towards and touch a valuable asset like a museum exhibit. It can also be used in any other application where approaching a sterile zone from a more crowded environment shall be detected.

This article describes how to configure the Map-based calibration and Geolocation in different calibration methods

This article provides an overview of object classification, describes how to configure it and what the limitations are.

Never lose track of an object of interest! Intelligent Tracking automatically zooms in to and follows a selected Intelligent Video Analytics object as far as possible with the camera.

When camera is set to auto track (by web interface) to "auto"-> IVA is detecting an object but camera is not following. Auto tracking works and metadata is displayed only on a stored preposition.

In this article, you will find such an automation process between Bosch Cameras and Advantech Adam I/O devices.

Do you want to configure Video Content Analysis of your device and "VCA: Authorization required" message is displayed in Configuration Manager? Find out here why this message is displayed and what you should do to fix it.

The choice of the tool depends on the way the camera and recording are managed.

This article describes the absolute minimum information we need in order to start analyzing and optimizing Video Analytics performance