Security: Video

Alarm Management has a split user management. The users are created in Alarm Management related to what they are allowed to access in the system.

This article explains how to switch a Bosch camera managed by a VRM to record to the SD card without factory defaults.

This article explains how to avoid black lines appearing in the live view of Bosch cameras.

“Error: Discontinuity in network stream!” appears randomly on the monitor/s connected to the VIDEOJET Decoder 7000 (7513). What could be the likely cause of this?

Follow this article to avoid getting the message: “Changing orientation is not possible because of the mounted illuminators”.

Configure BVMS Operator Client credentials, so the application starts without requesting username and password and add the shortcut path of the BVMS OC to the Windows start up directory

The HDD compatibility list for DIVAR AN 3000 and DIVAR AN 5000 in the Operations Manual, page 166 or you can find it through this article. Have a look!

This policy explains step-by-step what you should know about the Divar IP process when contacting Central Technical Support team and what to expect from them.

In case of unexpected behavior of the Bosch Forensic Search in Genetec Security Center this page can help during the investigation and in finding the root cause of the problems

This article outlines the required license for operating a Bosch Forensic Search within the Genetec Security Center.

The available cameras in the configuration dialog is controlled by 2 criteria: The camera needs to be a Bosch camera AND the camera needs to have some metadata recording available in XProtect

This article shows what shoud be checked if the KBD-Digital cannot be connected to the BVMS workstation.

The Dashboard has a Maximum temperature that exceeds 80 Degrees C and the camera will display "Status 8" when the internal temperature is above 80 Deg C.

Follow the steps below from this article to collect the configuration data file and the maintenance log file that might be requested by Central Technical Support team for troubleshoot & support purposes.  

Check this article and find the compatibility matrix between Bosch cameras and Milestone

A red LED will be displayed in front of the damaged HDD. On DIP-74xx with RAID5, with only one faulty HDD, there is no DATA LOSS.

This document is valid for all VideoView+ versions. Only the release notes of the latest VideoView+ version are fully updated and contain updates for earlier versions as well.

Redundant network connection to a NetApp array can be configured with virtual interface. NetApp provides tree different types of virtual interfaces (VIF). Check this article and find more details!

According to the BVMS 11. Release notes > 2.2. Removed functionality chapter > The digital monitor wall functionality has been removed. This removal has impact on the BVMS Viewer → Decoders are not supported anymore in BVMS Viewer starting with version 11.0 Other devices and functions that have been removed to ensure software security: Map migration (removed Autodesk design review installation) SMS gateway Dibos/ BRS Note: The Monitor Group functionality is still available in BVMS Professional/ Plus/ Lite.

In this article you will find out where you can find the POST snooping code of your DIVAR IP R2