Security: Video

In this article you can find the actions you need to do in order to solve the zoom speed for AUTODOME NDP-7512. A customer could observe a difference in zoom speed in comparison to the previous generation

If you want to control the camera from a DIVAR wired through a VJD 3000, you have to configure the VJD and the DIVAR as well. Below you will find the steps which will help you to set up your devices.

This article aims to define the way you can display camera video via decoders. Moreover, fifteen different settings scenarios and their effects will be outlined for the live video to be displayed through the decoder.

This recommendation could be applied if the storage is overloaded, as there are several Onvif cameras running through it.

This article explains how to find and calculate the specific size of BVMS logs on your server when the log starts to overwrite your own data.

PTZ camera (Autodome IP starlight) doesn't move in Pan or Tilt direction. This is a basic troubleshooting guide that will help you to fix this issue.

This article is focused on a method of creating a new profile with own parameters and make this new profile active.

This article describes how can you check the status of your Software Maintenance Agreement (SMA) for Bosch Video Management System (BVMS)

This article describes how can you disable password Policy for Cameras/ Encoders and provide compatibility with older/ 3rd party systems.

This article describes how a Tattile camera can be connected to BVMS. We recommend keeping the Tattile camera documentation and BVMS configuration manual at hand to fine tune the system configuration to the specific needs of your project

This article describes the considerations that need to be taken into account when designing a video surveillance system that is suitable for person identification. 

The attached document provides more insights into the system configuration regarding the BVMS - Operator collaboration with Slack

The choice of the tool depends on the way the camera and recording are managed.

This article describes the absolute minimum information we need in order to start analyzing and optimizing Video Analytics performance

This article provides a step by step description of how to create certificates and configure their distribution in the large systems. 

Similar to VRM eXport Wizard 2.0,  encrypted and unencrypted VRM recordings can be exported (VRM block export) from any video surveillance system based on Bosch Video Recording Manager (VRM) and exported recordings can be converted to mp4-files.    VRM eXport Wizard 2.10 introduces a new look and feel of the graphical user interface and some UX changes. In general, the VRM eXport wizard is a software tool that allows you to export video directly from the VRM and to convert exported video data to mp4. You can find the VRM eXport wizard setup file in the VRM Master Installer or in the bonus directory of the BVMS zip file. Exports made with the VRM eXport Wizard 2.10 can be open in BVMS (Viewer) 9.0 or newer. In this document we describe how to use the VRM eXport Wizard for either export of video data and conversion of the exorted video data to mp4. With the VRM eXport Wizard 2.10 encrypted and unencrypted VRM recordings can be exported (VRM block export) from any video surveillance system based on Bosch Video Recording Manager (VRM) and exported recordings can be converted to mp4-files. Therefore, the VRM eXport Wizard 2.10 offers - similiar to the previous version - the following two options, compare also Figure 1: Export Video Recording Manger recordings of cameras Convert already exported data to MP4 files

The modern and easy to use Bosch Video Security Client version 3.2 provides you new features. Check out this article and find what's new!

Find out from this article if there are restrictions of VRM Configuration utility pre-installed on DLA

Find out from this article how to configure a singe mode VIF on NetApp array. For example if we have 2 (or more) physical interfaces, how to connect them to different network segments and, if one of the segments fails, the second network interface to step in automatically?

BP+ (Baseline Profile +) is available in any of the new ARM based chipset encoders, like the VIP-X1 XF.  BP+ is needed for compatibility with Divar and hardware decoders, for example, theVIP XD decoder.