If you want to be able to replay the recording for the complete retention time, you should use VRM replay. VRM should be accessible and added to the VSC
The unit can receive the time signal from a time server using various time server protocols and then use it to set the internal clock. The device polls the time signal automatically once every minute. To check the NTP connection from the camera please follow this article.
First recommendation would be to configure the mode for IVA as a trigger, setting IVA as Profile 1 for “trigger off” and IVA as silent for “trigger on”.
You can call desired pre-positions (PTZ) of Bosch IP cameras by using OSRD protocol or BiCom protocol. Please check this aticle to find some examples and detailed explanation.
Let’s suppose that you have one setup which consists in an Adam 6060 I/O module, BVMS and a DINION IP thermal 8000 camera. Can the state of an ADAM relay module be changed when the IVA from the camera generates an alarm?
By checking the Zoom threshold box you will select the current zoom position at which the mask will appear as the camera zooms in or be hidden as the camera zooms out.
Applicable when using the following software application.
Bosch Video Management System (BVMS) version 10.0.1 and above.
Bosch Configuration Manager version 7.0 and above.
Live page on the web browser for IP camera operating on firmware version 7.70.0126 and above.
After clicking the Forensic Search button in Bosch Video Management System (BVMS) - Operator Client, "Video image is not available" message is displayed.
What could be the reason?
This article contains a simplified and generalized example, that could be helpful in building a particular tailored script related to implementation of event receiver in BVMS SDK scriplet.
If you add a decoder that has 2 monitors connected, you must display the Edit Decoder dialog box of the decoder and update the device capabilities of this decoder. For each monitor add a further monitor wall.
