Security: Video

This article explains which is the difference between BVRAdmin lost password versus VRM lost password (reset) of DIVAR IP.

Bosch requires the installer to provide the specified power mentioned on the product spec sheet and labels. While taking into consideration the POE standards. Bosch doesn't support out-of-spec operation of our cameras as we cannot guarantee proper functionality in such circumstances. Thus, we will not be providing out-of-spec voltage or power values at this stage.

Waiting For Power - Invalid PoE source was detected during the auto-negotiation. The Pan Motor, Tilt motor, and the heaters will be disabled.

For certain conditions, MIC cameras will display status codes on the video image. What does "status 9" mean on the MIC IP ultra 7100i │ MIC IP starlight 7100i camera's web page ?

Be sure that the MIC-7100i camera is configured in BVMS Configuration Client with "Bosch-AutoDome Bilinx" protocol and not with "Bosch-AutoDome" protocol or other options from the list.

This article presents what are the limitations of Privacy overlay in BVMS 12 (Pano cameras, h.263 & MPEG, decoder, VSC).

Milestone search tools (People & Vehicles) find results for other cameras. But the Bosch Forensic Search Agent finds zero results for DINION IP starlight 7000 FW v7.89. Why?

The "Lens rotation" slider can be used to correct for any manual lens rotations performed during installation. If the lens is manually rotated during installation, the slider value should be aligned with the rotation value shown on the lens.

The inconsistency in the tamper detection functionality could be due to various factors. Follow this article for more details.

Unsupported camera model: Auto-calibration is currently not supported for this camera model. Calibration could produce wrong results or might not work. Why is this message displayed in Configuration Manager?

This article gives an overview of CPPs that correspond to certain types of cameras, decoders and encoders.

ONVIF control of the thermal DZ was never planned for the MIC-9000i in the launch of the product. However, you can get the Pan and Tilt via ONVIF Device Manager to work by enabling the PTZ configuration of the stream. 

This Authorization Letter is applicable for all Bosch Security and Safety products & software when a password reset for them is requested by customers, system integrators or by a local sales representative.

Find out from this article which Bosch encoders and decoders are compatible with BVMS

BVMS Version 10.0: please note that the export mechanisms provided in the BVMS Configuration Client might not export the user-data. Check this article for more details!

According to the DIP Whitepaper, the unit supported 128 channels before upgrading. After upgrade to BVMS >= 11.0, having the MBV-BPLU-DIP base, the channels licenses limit is 256 channels 

Starting from July 2024, it will not be possible to commission new devices via MAC address (Device Layer). Running devices remain untouched until end of life of Device Layer, but new commissioning will be only possible with Remote Portal devices from then on.

Welcome to the 3.6 release of Video Security for Windows, Android and iOS. There are new features in this release!

Load balancing is provided with respect to the bandwidth and the number of iSCSI connections and is configurable per IP address (iSCSI target).

This article shows where to find the BIOS default password of DIVAR IP all-in-one 7000 gen4 (DIP-74xx).