Security: Video

Find out from this article what can you do if the Windows product key cannot be activated on your DIVAR IP and if this message was displayed: "This key didn't work, please check it and try again, or try a different key."

To guarantee high quality imaging through the entire range of products, Bosch Security Systems uses a Common Product Platform (CPP).

This article explains where to find the Serial-No. of a system. The BOSCH sticker is most important.  For registration and NetApp case creation of the DSA E2700 and the DSA E2800 units only the NetApp S/N of the Controller base unit is relevant. 

This is a living document and the list will be constantly updated. Details can also be found in the BOSCH Product catalogue:

This article presents what parameters to set in BVMS on a new Stream Quality profile.

This article provides an answer if the  an OS upgrade to Win2016 can be performed on old DIP 3000, DIP 6000 or 7000 R1.

Can I display more than 1 camera on a single Monitor of Decoder VJD-7513 in BVMS 11.0 when an alarm is triggered?   System Overview: BVMS 11 1 monitor connected to 1 x VJD-7513 that is part of a Monitor Group The monitor has a layout consisting of several image panes Desired status: when an alarm is triggered → pop up the image of the 4 cameras on the same decoder monitor

Windows 11 Pro is now officially supported as OS for BVMS 11.1.1 Operator Client

 This article shows the keyboard shortcuts that can be used by operators when operating the BVMS system. 

Starting with BVMS 10.0, ONVIF encoder events can be retrieved from VSG or ONVIF encoder directly. Additionally to ONVIF profile S, BVMS 10.0 supports ONVIF profile T.

Remote Portal's Remote Connect service allows connection to your devices through the Remote Portal with your client software, such as Video Security Client and Video Security App.

The browser supported by Bosch cameras depends on the CPP that camera belongs to and on the Firmware version the camera has.. In web browsers that do not support MPEG-ActiveX, VCA configuration is only possible via Configuration Manager.

The calculation of the storage capacity is done in different way in Configuration Client and VRM Monitor. Check this article and find useful details!

The BVMS 11.1.1 Configuration Manual contains the lists for all components of BVMS, the ports that must be open within a LAN. You can find the used ports list starting with page 346 from the BVMS Configuration Manual.

Find out from this article how does the ‘Active profile’ work for Flexidome Multi 7000i camera

Find out here what could be the cause of the following message displayed on DIVAR IP 7000 R2: "The instruction at 0x6566f31c referenced memory at 0x00000008. The memory could not be read."

Whenever a central NTP Server is available the recommendation is to synchronize all cameras against the NTP central server.

The firewall configuration dialog is a fixed step in the setup process and will allow automatic configuration of all required firewall settings to run BVMS.

This article explains how is the storage capacity calculated for DSA E-Series E2800 12-bay (RAID 6).

This article explains what does the color of the led in the front view of the DIVAR IP AIO 5000 indicate.