Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    100% helpful (2/2)
    ‎06-03-2022 08:42 AM
    This script will make your encoder trip relay 1 only when IVA rule #1 alarm is active.
    View full article
    ‎06-08-2022 07:56 AM
    The initial idea of the Project Assistant is nicely summarized in the video from this article
    View full article
    100% helpful (2/2)
    ‎08-04-2022 11:40 AM
    This is an example on how to integrate 3rd party devices/software to trigger an event to take place on the encoder. 
    View full article
    ‎06-08-2022 08:10 AM
    Check this article and see what's new in Project Assistant version 1.4.0
    View full article
    100% helpful (1/1)
    ‎10-26-2022 12:54 PM
    This article presents a  consistent overview of the available BVMS articles on the Knowledge Base
    View full article
    100% helpful (1/1)
    ‎08-17-2022 04:59 PM
    The VRM eXport wizard is a tool that allows you to export video directly from the VRM. This article describes how to use the VRM eXport Wizard. BVMS 10 comes with the VRM eXport Wizard 1.20.0016.
    View full article
    100% helpful (1/1)
    ‎08-12-2022 02:19 PM
    You can set-up your own webserver and host customer JPEG images yourself. You can find a warehouse example in this article, fully based on JPEG based static images.
    View full article
    100% helpful (1/1)
    ‎06-14-2022 04:55 PM
    Follow this article and find out how to store a snapshot of all cameras automatically from the Operator Client
    View full article
    100% helpful (1/1)
    ‎10-26-2022 12:41 PM
    The firewall configuration dialog is a fixed step in the setup process and will allow automatic configuration of all required firewall settings to run BVMS.
    View full article
    100% helpful (1/1)
    ‎08-12-2022 02:06 PM
    Please note the material number change for CPP6 cameras. This will result a change in minimum FW release version.
    View full article
    100% helpful (2/2)
    ‎05-20-2021 10:09 AM
    Question   What is the difference between RAID 5, RAID 5 plus a Hot Spare and RAID 6?   Answer   The RAID combines two or more physical drives into a logical unit presented as a single hard drive to the operating system. There are currently six basic RAID levels: RAID 0, RAID 1, RAID 0+1, RAID 1+0, RAID 3, RAID 4, RAID 5 and RAID 6. The scope of this article is to provide basic information for the levels RAID 5 and RAID 6 and to compare them from point of view of performance and security.   Hot spare   is a drive that acts as a stand by drive in RAID 1, RAID 5 or RAID 6 volume. It is fully functional drive that contains no data and is not used during normal operation. If a drive from the volume fails, the controller reconstructs the data from the failed drive to the hot spare drive. A   RAID 5   array is designed to protect against the failure of a single disk within the array. Because of the way that RAID 5 works, the total capacity of one disk is lost to overhead. If, for example, a RAID 5 array contained five 10TB disks, then the array’s usable capacity would be 40TB. A   RAID 5 (with Hot Spare disk)   array can be configured to treat one of the disks as a hot spare. Then one of the disks is reserved as a replacement in the event that a disk fails. For the above example with five 10TB disks, this would decrease the example array’s usable capacity to 30TB. A   RAID 6   array is designed to protect against two simultaneous disk failures. However, the price for this extra protection is that two disks' worth of capacity is lost to overhead. As such, a RAID 6 array made up of five 10TB disks would have a usable capacity of 30TB because 20 TB is lost to overhead. The   performance   during Normal Operation is measured in IOPS (Input/output operations per second) and as a sum for all the disks (excluding the Hot Spares and decreased for writing parity data) in the array.  As a rule of the thumb, the higher the overhead associated with writing parity data (in the above example RAID 5 with Hot Spare causes the same overhead like RAID 6) the lower the IOPS. The reason for implementing RAID arrays is to   secure the data. The level of   protection   does not directly correlate with the overhead. From the above example both RAID 5 with Hot Spare and RAID 6 have same capacity, but offer different level of protection. In case of failure of RAID 5 array with Hot Spare, the Hot Spare is activated and the rebuild process start immediately. The system can recover from a single disk failure and during the recovery, process is vulnerable to second disk failure. Therefore, RAID 5 and RAID 5 with Hot Spare disk offer the same level of protection – single disk failure.   In contrast, if a disk fails at RAID 6 array, the recovery will start only after the faulty disk is replaced manually.  However, if during the recovery process second disk fails, the RAID 6 array will stay functional.
    View full article
    ‎08-08-2022 10:50 AM
    This article contains documents attached which describes the installation package for BVMS. Operating system support of the specific BVMS version is listed in the BVMS release notes.
    View full article
    ‎07-28-2021 11:21 AM
    The attached manual provides information for Mobile Video Service (MVS) within Bosch Video Management System. You can find:  - how to configure the router and Internet Information Service (IIS) - how to add MVS to BVMS - user guide - some troubleshooting tips   This document can also be found online here.
    View full article
    ‎11-24-2022 11:52 AM
    This article describes the different components that Bosch Video Management System offers to to establish a connection between Bosch Video Management System and a 3rd party management system. This description helps you in writing your own commands for controlling Bosch VMS from inside your management system.   
    View full article
    100% helpful (1/1)
    ‎11-24-2022 11:27 AM
      This article shows the keyboard shortcuts that can be used by operators when operating the BVMS system. 
    View full article
    100% helpful (1/1)
    ‎12-13-2021 07:50 AM
    This article will provide a basic explanation and simple examples of the interfacing (scripting, calling functions by external applications) functionality in Bosch Video Management System.
    View full article
    100% helpful (3/3)
    ‎08-12-2022 01:39 PM
    Check this article and have a look at the  attached documents which describe the settings you must perform after having installed BIS and BVMS on the different computers.
    View full article
    100% helpful (2/2)
    ‎10-26-2022 12:13 PM
    This attached document describes how Bosch Building Technologies handles the life-cycle of the BVMS, BIS, AMS, and APE, and in which state a specific release can reside.
    View full article
    ‎08-12-2022 01:56 PM
    The modern and easy to use Bosch Video Security Client, version 3.1 comes along with new features. Check this article!
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist