Security: Video

Check this article and find out the port of VideoJet X20/X40 XF that must be opened in the firewall for video stream transmission

This article describes the mechanism of ANR 2.0 and how it can be set up. In the following ‘camera’ is used as a representative for all video source devices supporting ANR 2.0.

This article gives you more information about FLEXIDOME IP starlight 8000i camera streaming capabilities.

In this article, we will address the difference between Cloud Storage & Event alarm clip and what the customer is entitled to base on the licenses he had purchased.

This article contains several common questions and answers about Firmware of Bosch MIC IP Starlight 7000i cameras

The package updates to the latest recovery image (app0), regardless of which app1 or former app0 firmware is running on any CPP4, 6, 7 or 7.3 platform.

This account has been locked because of too many failed login attempts. Try again in 39 seconds.

When using ANR function in combination with 'alarm only' recording , recording 1 is with only the motion recorded.

It is advised to use Bosch tools like the Configuration Manager to configure the camera, that does not allow for issues like XSS

To get multiple events in one alarm, please enable Event Batching in the related Service.

This article describes the behavior of the cameras when two power inputs are connected to the camera.

🛈 Port Forwarding Allows remote computers (for example, computers on the Internet) to connect to a specific computer or service within a private local-area network (LAN). In a typical residential network, nodes obtain Internet access through a DSL or cable modem connected to a router or network address translator (NAT/NAPT). Hosts on the private network are connected to an Ethernet switch or communicate via a wireless LAN. The NAT device's external interface is configured with a public IP address. The computers behind the router, on the other hand, are invisible to hosts on the Internet as they each communicate only with a private IP address. When configuring port forwarding, the network administrator sets aside one port number on the gateway for the exclusive use of communicating with a service in the private network, located on a specific host. External hosts must know this port number and the address of the gateway to communicate with the network-internal service. Often, the port numbers of well-known Internet services, such as port number 80 for web services (HTTP), are used in port forwarding, so that common Internet services may be implemented on hosts within private networks.

XProtect offers 3 different modes of metadata streaming. What are the differences there?

Check this article and find the compatibility matrix between Bosch cameras and Milestone

According to the Release Letter for V3.1.1 and V.3.2.0 - "SNMP- No traps are launched for HDD status changes and recording stops"

The LTC keyboard is conceived for analog systems, where you have a monitor and you add a keyboard for control and connect it directly to the camera.

There is no need to disable UDP encryption on FLEXIDOME multi 7000i camera.

This feature is not available in BVMS 10.1. You cannot do it automatically for multiple cameras. You can do it one by one manually through Config Client.

This article contains different Q&A regarding the Camera certificate in Config. Manager & WEB GUI: size limit, supported formats and limitations.

New generation of Bosch cameras: no default password, the user has to create one