Security: Video

This article describes the behavior of the cameras when two power inputs are connected to the camera.

🛈 Port Forwarding Allows remote computers (for example, computers on the Internet) to connect to a specific computer or service within a private local-area network (LAN). In a typical residential network, nodes obtain Internet access through a DSL or cable modem connected to a router or network address translator (NAT/NAPT). Hosts on the private network are connected to an Ethernet switch or communicate via a wireless LAN. The NAT device's external interface is configured with a public IP address. The computers behind the router, on the other hand, are invisible to hosts on the Internet as they each communicate only with a private IP address. When configuring port forwarding, the network administrator sets aside one port number on the gateway for the exclusive use of communicating with a service in the private network, located on a specific host. External hosts must know this port number and the address of the gateway to communicate with the network-internal service. Often, the port numbers of well-known Internet services, such as port number 80 for web services (HTTP), are used in port forwarding, so that common Internet services may be implemented on hosts within private networks.

XProtect offers 3 different modes of metadata streaming. What are the differences there?

Check this article and find the compatibility matrix between Bosch cameras and Milestone

According to the Release Letter for V3.1.1 and V.3.2.0 - "SNMP- No traps are launched for HDD status changes and recording stops"

The LTC keyboard is conceived for analog systems, where you have a monitor and you add a keyboard for control and connect it directly to the camera.

There is no need to disable UDP encryption on FLEXIDOME multi 7000i camera.

This feature is not available in BVMS 10.1. You cannot do it automatically for multiple cameras. You can do it one by one manually through Config Client.

This article contains different Q&A regarding the Camera certificate in Config. Manager & WEB GUI: size limit, supported formats and limitations.

New generation of Bosch cameras: no default password, the user has to create one

The maximum resolution of 5.3 MP can only be achieved with H.264 encoding

Remote Connect Lite service enables connection between Divar network/hybrid, cloud and client software.

Before using the App please make sure that you have configured the Passwords, users and ports on your DIVAR and the same data is entered in the App.

The DIVAR IP units are prepared from production to use at first setup the port 8454.

Find out in this article the Bosch Inteox cameras portfolio with the New Features

This article contains the options for physical/ default reset of Bosch Inteox cameras.

This article explains how to proceed when you want to register a camera to Bosch Remote Portal and the client’s network is restricted.

To change the camera name in Remote Portal, you need to change the camera's Device name and then re-register the camera to Remote Portal.

This article explains the 3 options for deleting a user from Bosch Remote Portal.

Remote Portal's Remote Connect service allows connection to your devices through the Remote Portal with your client software, such as Video Security Client and Video Security App.