Security: Video

The configured camera TCP port is used from the BVMS Operator Client to the camera. This port is used by the BVMS Operator Client as a destination port. The source port is dynamic and therefore, it cannot be adjusted.

Should the inverter produce a sine/sinusoidal wave, a square wave or other?

Hash Tag "#" is one of the few special characters, which is accepted by the camera, but it cannot be accepted on BVMS side (in order to connect to the camera) — due to the limitations of communication specifics some BVMS components are using. And as a result, communication might not work properly and "No connection" warning message in Operator Client image pane and black screen might occur

White cameo in BVMS Operator Client or "device failed" message may be caused by the NVIDIA graphic card driver that might not be compatible.

This behavior occurs when you have requested the SMA extension and you didn't upload the Activation file in the BVMS Configuration Client.

If you forgot the password of your BVMS — Bosch Video Management System and you want to reset its password, the Central Technical Support Team can help you.

If you forgot the password of your Bosch IP recorder and you want to reset its password, the Central Technical Support Team can help you.

Starting with firmware 6.51.0026, clearing passwords was changed to only reset service user level password.

Subscribe directly to this article (Option 1) or to the firmware_release_notification label (Option 2) and you will receive a notification in your inbox every time when a new Firmware is released and added to the list within this article.

This article guides you to easily find the connector’s pinout of FLEXIDOME Panoramic 5100i IR camera

Port 3260 is used on iSCSI ports. Control-ports require 2463, 50889, 161, 162, 80 and 443 to be accessible.

The connection of 2N® Helios IP intercom to BVMS and Bosch Access Control System is possible thanks to the implementation of ONVIF and Wiegand protocols, which ensure mutual compatibility.

For Scriplets (because they are process of BVMS): .NET 4.8.  For SDK App: BVMS SDK .dll is compiled in .NET 3.5; .NET 4.8 can be used because it is backward compatible

The MIC IP fusion 9000i supports only simplified Chinese language. There is no option to select traditional Chinese in the menu.

This article contains some hints about what to do when the FLEXIDOME IP 3000i IR does not provide Analog stream or it provides a grey image

The detection distance (based on the pre-defined requirements*) depends on the focal length and the size of the of the gun. 

This article answers the question:  Is there a search limit of results in BVMS Operator Client Logbook for collecting license plate data?

This article presents the the successor of VIDEOJET Decoder 7000 (VJD-7513). The replacement of it is F.01U.407.935 / VJD-7523.

The RTC_AUDIO_LOUDSPEAKER_ON_OFF flag is not activated.

Divar 700 uses the concept where it assumes to be the (master) device to have control over the cameras and their streams.