There are two methods of working with 3rd party apps: through Remote Portal and Configuration Manager. In this article you will find the step-by-step guide where is described the method using Configuration Manager.
This article describes the method about how you can import a .txt file containing a group of cameras from Configuration Manager in Project Assistant App.
BVMS v11.0 offers a map-based tracking assistant and improved geographical awareness with online maps. Read on to learn how to configure the map-based tracking assistant.
Dinion IP starlight 6000 HD/ Dinion IP ultra 9000 MP is a fixed camera, not a PTZ camera. The camera is only capable of e-PTZ (Electronic Pan, Tilt and Zoom).
This information may be requested by Central Support Team, as the bundle file is useful for troubleshooting the improper behavior of the unit.
The method for collecting the NetApp DSA E2700 support bundle file is provided below.
A network management server can poll the health status of a device via SNMP requests. This article shows how to configure Bosch cameras in order to be able to answer to such requests.
This article explains how to configure the Bosch ITS and NTCIP licensed versions of IP moving cameras to respond to National Transportation Communications ITS Protocol (NTCIP).
This article explains how you can monitor the hardware health status of the DIVAR IP storage devices → Measure can be taken to repair the device if something fails.
Starting with firmware 7.10, an option to export from RAM recording buffer allows recording exports on the fly without requiring an SD card or external iSCSI storage.
Central Technical Support team may ask you to provide them with the logs from VIDEOJET decoder 7000 (VJD-7513). Follow this article and find out how to do this!