Security: Video

The IP camera address is always the key if you would like to monitor or remote viewing it. Like any network device, the camera is assigned an IP address when it is connected to the router with Internet access and powered on. Here we will introduce 3 ways to find the network camera IP address quickly and easily.

The Release Letter for CPP 7.72.1118 provides information about the dependencies between firmware versions for a better understanding of the upgrade process of devices with older firmware.

This article contains the lists of cameras that support Camera Trainer, what Camera Trainer is, how it works, what to use it for and what not, and how to configure it. 

Find out from this article how to pass a special connection string to request a multicast stream via RTSP from a BOSCH IP camera or IP encoder.

This article describes how to factory default a DIVAR IP 5000 Unit.

This Video should help you to understand, what calibration means, why and when to calibrate the cameras.

The purpose of this article is to provide the step-by-step process for replacing defective drive, rebuild RAID, create new iSCSI target, VHD and LUNs for DIP 7000 R2.

This articles gives a short introduction to scripting alarm and counter tasks with Intelligent and Essential Video Analytics in FW 7.60. It also provides a broad selection of example scripts for explanation as well as including real world application examples.

This article informs about improvements in firmware handling and new security mechanisms that help our customers to increase security related to firmware updates and IP camera protection.

Relates to: IP Storage/PC HW - DIVAR IP 6000 R2 and DIVAR IP 7000 R2 Both DIVAR IP units running the BIOS from American Megatrends Inc. (A.M.I) There are PRE BOOT or POST BOOT beeps. Please see the following Acoustic Error Codes.

The following procedure will allow you to create a self signed certificate to allow a trusted connection between a web browser and MVS.

This article describes how to set up map displays of objects detected and tracked by Intelligent Video Analytics, Essential Video Analytics or Intelligent Tracking with FW 6.4x and Video Security Client 2.1.

Never lose track of an object of interest! Intelligent Tracking automatically zooms in to and follows a selected Intelligent Video Analytics object as far as possible with the camera.

This article explains how BVMS can be configured to connect to an LDAP (or Microsoft Active Directory) and use it as a base for user authentication.   BVMS is able to function in a (Windows) domain-controlled environment. The BVMS (and related) services run under the local system account. If another (domain-controlled) account is used to run these services, their permissions level should be the same as the local system account. It is recommended to add the Windows server to the domain first (as a domain member), before installing the BVMS software. The BVMS configuration is independent from the domain configuration, however, crucial changes in the domain could break the connection between the BVMS system and the LDAP authentication mechanism.

This article lists the scenarios in which technical support normally request dump file from a BVMS system.

This article describes which camera settings influence the performance of Essential or Intelligent Video Analytics in Bosch IP cameras, and what the best practices are.

This article describes how to count with Bosch Video Analytics with How to Video and a Technical Note on the topic.

This technical note summarized the different integration possibilities available today and the clients supplied by Bosch.

This is the old way as for Project Assistant versions < 1.3.

This article describes the camera tamper detection options available with FW 6.30: Scene too dark / bright, global change, reference image check.