Bosch Building Technologies

    cancel
    Showing results for 
    Search instead for 
    Did you mean: 

    Security: Video

    Sort by:
    100% helpful (1/1)
    3 weeks ago
    The following procedure will allow you to create a self signed certificate to allow a trusted connection between a web browser and MVS.
    View full article
    100% helpful (1/1)
    ‎04-06-2021 09:11 AM
    Related Products: BVMS, application crash, memory dump This article lists the scenarios in which technical support normally request dump file from a BVMS system. It contains general guidelines how to create a dump file for BVMS system and provides links to more concrete articles, that correspond to particular issues and exact steps to create a dump. BVMS dumps are needed to troubleshoot the following types of issues: Application crashes – dump is expected to provide more information about the cause of the crash and its origin. Memory or handle leaks – dump is expected to point to their origins Deadlocks, freezes and hangs – dump is expected to point to their origins Recommended tool to create BVMS dumps. The recommended tool is Procdump. It is a command line tool which must be started from the command shell. Development provides couple of .bat files that start Procdump with predefined parameters and cover the most common dump creation cases. The tool as well as the set of .bat files are attached to this article: BVMS_DumpTools_V2.zip The batch file names follow a naming guideline: <Executable>_<Dump use case> , where <Executable> is one of: ConfigClient ConfigWizard OperatorClient ManagementServer ArchivePlayer ExceptionTest and <Dump use case> is one of SingleDump TwoDumps DumpOnException DumpOnHang ActivatePostmortemDebugging There are 3 possible error scenarios and corresponding dump creation methods: Dump creation for reproducible crashes that trigger Windows Error Reporting Run the affected application/service (Operator Client, Configuration Client or Management Server Service) Reproduce the steps that lead to the crash Leave the Windows crash dialog open Run the corresponding batch file for creating a single dump: *_SingleDump.bat. E.g. run OperatorClient_SingleDump.bat to create a single dump of the Operator Client process. Provide support with the resulting .dmp file a description of the steps to reproduce the problem ConfigCollection Note: attached you can find a configured example for this scenario and application Operator Client - BVMS_OC_dump_onException.zip Dump creation for reproducible memory or handle leaks Run the affected application/service (Operator Client, Configuration Client or Management Server Service) Run the corresponding batch file for creating two dumps: *_TwoDumps.bat. E.g. run OperatorClient_TwoDumps.bat to create two dumps of the Operator Client process. Note that by default, the delay between the two dumps is set to one hour (3600 seconds). Depending on the magnitude of the memory leak, you might want to increase/decrease the delay. To do that, edit file *_TwoDumps.bat: replace value "3600" by a value that fits your needs e.g. a value of "7200" will create two dumps with a delay of two hours. Reproduce the steps that lead to the memory leak. Wait until the second dump was created. Provide support with the resulting two .dmp files a description of the steps to reproduce the memory leak a ConfigCollection Dump creation for crashes/hangs/freezes that are hard to reproduce Deactivate the restarting option for Operator Client / Configuration Client: To deactivate the restarting option for Operator Client / Configuration Client: edit ..\Bosch\VMS\bin\ConfigClient.exe.config or ..\Bosch\VMS\bin\OperatorClient.exe.config. Navigate to section <appSettings> add a new entry <add key = "DisableExceptionHandling" value="TRUE" />. Run ActivatePostmortemDebugging.bat Run the affected application/service (Operator Client, Configuration Client or Management Server Service) As soon as the issue appears, check whether the dump was created. Provide support with the resulting .dmp file description of the steps to reproduce the crash ConfigCollection Note: attached you can find a configured example for this scenario and application Operator Client - BVMS_OC_dump_Just-In-Time-Debuger.zip
    View full article
    100% helpful (1/1)
    ‎04-29-2021 10:40 AM
    Related Products: BVMS SDK, BVMS    Overview: BVMS Scriptlets can be debugged via logging to a logger file or messaging to the Operator workstation. This article describes how to enable BVMS Scriplet logging. You can log to the Server Script log or the Client Script log. Logs are default send to C:\ProgramData\Bosch\VMS\Log   1.Creating Log files ClientScriptLogger – automatically created Creates file “ClientScriptLog.txt” ServerScriptLogger - automatically created  Creates file “ServerScriptLog.txt”   2.Log information to the log files There are 3 methods to log information: Log Info Log Error Log Debug   Examples: [Scriptlet("59c4d66e-9395-4dcc-8d27-90dc2b7a00c4")] public void DemoLogger() { //use refence:C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727 MessageBox.Show("Hello World"); Logger.Info("Hello World script started"); Logger.Error("Hello World script started"); Logger.Debug("Hello World script started"); // Not writing to ClientScriptLog.txt ! }   3.Logging Location - C:\ProgramData\Bosch\VMS\Log. The logs are automatically collected by the BVMS Configuration Collection Tool. 4.Changing the location of the BVMS Scriplet Logging.   Server Scripts : Logging Directory can be found in the file: C:\Program Files (x86)\Bosch\VMS\AppData\Server\CentralServer\BvmsLogCfg.xml and is defined by the ServerScriptLogAppender path: Default: </appender> <appender name="ServerScriptLogAppender" type="Bosch.Vms.Shared.Logging.Imp.RollingFileAppender, Bosch.Vms.Shared.Logging.Imp"> <file value="%CommonApplicationData%\\Bosch\\VMS\\Log\\ServerScriptLog.txt"/>   Client Scripts : Logging Directory can be found in the file: C:\Program Files (x86)\Bosch\VMS\AppData\Client\OpClient\ApplicationWiring\Nvr\LogCfg.xml and is defined by the ClientScriptLogAppender path: Default: </appender> <appender name=“ClientScriptLogAppender" type="Bosch.Vms.Shared.Logging.Imp.RollingFileAppender, Bosch.Vms.Shared.Logging.Imp"> <file value="%CommonApplicationData%\\Bosch\\VMS\\Log\\ClientScriptLog.txt"/>
    View full article
    100% helpful (1/1)
    ‎05-19-2022 07:55 AM
    This article explains how to c ollect Video SDK Logs for VSDK based applications.
    View full article
    100% helpful (1/1)
    ‎04-29-2021 02:20 PM
    Related Products: Video Analytics for Firmware 6.60 and above This article covers traffic monitoring of Bosch Video Analytics with How to Videos (one already available and one in planning) Default scenario of wrong way detection Learn how to use the default scenario of wrong way detection: A predefined scenario that can be used to detect an object that is traveling the wrong way.   Default scenario traffic incidents This predefined scenario is designed to detect common traffic incidents on roads: Wrong way – triggers an alarm if object travels in wrong direction Pedestrian – triggers an alarm if pedestrian is on the road Slow vehicle – triggers an alarm if vehicle moves slower then predefined speed. Stopped vehicle – triggers an alarm when vehicle is stopped longer than predefined time span. Dropped object – Triggers and alarm if an object is dropped on the road   This how to video shows in detail how to use the predefined tasks Wrong way, Slow vehicle and Stopped vehicle.   Note: If needed you can get additional how to information on camera calibration.  
    View full article
    100% helpful (1/1)
    ‎04-29-2021 11:09 AM
    This Video should help you to understand, what calibration means, why and when to calibrate the cameras.
    View full article
    100% helpful (1/1)
    ‎07-28-2021 02:05 PM
    Relates to:   IP Storage/PC HW - DIVAR IP 6000 R2 and DIVAR IP 7000 R2 Both DIVAR IP units running the BIOS from American Megatrends Inc. (A.M.I) There are   PRE   BOOT   or   POST   BOOT   beeps. Please see the following Acoustic Error Codes.
    View full article
    100% helpful (1/1)
    ‎11-19-2021 09:25 AM
    This article describes how to set LUNs on a target to Read Only via Configuration Manager.
    View full article
    100% helpful (3/3)
    ‎02-09-2022 03:30 PM
    This articls provides the steps to update a DIVAR IP system. The firmware version 3.180.05-1562 can be used with the LSI MegaRAID Controller. 
    View full article
    100% helpful (1/1)
    ‎08-13-2021 01:03 PM
    In this article we cover the following basic questions: How to Factory Default a NetApp E-Series unit by using BOSCH tools and NetApp WEB GUI? How to download the NetApp Support Bundle of a reachable online NetApp Storage Array
    View full article
    100% helpful (1/1)
    ‎04-20-2022 03:02 PM
    Here we describe the steps that would be need to be done to successfully move VRM to a new server.
    View full article
    100% helpful (1/1)
    ‎04-15-2022 04:03 PM
    This article describe how to configure your camera to get optimize focus as-well during the day as night
    View full article
    100% helpful (1/1)
    ‎04-08-2022 03:33 PM
    In this article it is explained in a step-by-step guide how to activate the needed services in Remote Portal to be able to connect the cameras to Bosch Cloud VMS.
    View full article
    100% helpful (2/2)
    ‎10-14-2021 04:11 PM
    MTU stands for "Maximum Transmission Unit." MSS stands for "Maximum Segment Size"
    View full article
    100% helpful (1/1)
    ‎12-02-2021 09:15 AM
    Bosch has implemented the ONVIF Profile M with MQTT support in its cameras (CPP6, CPP7 and CPP7.3) in the firmware  7.81.0060  and above.
    View full article
    100% helpful (1/1)
    ‎11-22-2021 07:57 AM
    Please check which port and protocol have been set on the camera that has the live black image.
    View full article
    100% helpful (2/2)
    ‎07-30-2021 12:23 PM
    This article will explain how to set-up the RAID quickly in order to start the "re-imaging" process from the Recovery DVD (one at DIVAR IP 6000 R2 - or two DVDs at DIVAR IP 7000 R2) enclose to each DIVAR IP 7000 R2 or DIVAR IP 6000 R2 delivery. 
    View full article
    100% helpful (1/1)
    ‎10-18-2021 11:27 AM
    This article lists how to configure ANR feature in BVMS and how correctly to set up iSCSI and direct replay.  Configuration   of   ANR in BVMS system Insert SD card into camera and power it on. In Configuration Client, select Devices page. Device password and CHAP password. There are two possible configuration set ups - to configure password for both device and iSCSI connection or to leave both without password. Choose and configure one of them (3.1 or 3..2).    3.1.  Set device user password and CHAP password 3.2.  No CHAP password for ANR Note: Mixing the parameters between the two options 3.1 and 3.2 will lead to issues in direct replay from SD card.
    View full article
    100% helpful (1/1)
    ‎10-13-2021 02:28 PM
    Traffic detector has been developed to cope with all traffic densities up to high density like congestions and queues in front of traffic lights. It also detects non-moving vehicles and is thus applicable for smart parking. In addition to vehicles, it also detects pedestrians. Applications  Tunnels & Highways: o Collection of traffic statistics o Detection of congestions for automatic speed signaling o Detection of wrong way driving  Intersections: o Detecting presence and volume of vehicles  Smart parking: o Detect parked cars
    View full article
    100% helpful (1/1)
    ‎09-28-2021 11:50 AM
    This article describes the easiest method for adding Expansion shelves to a Base unit DSA E-Series E2600, E2700 or E2800.   This article also applies when: The amount of storage is overloaded and you need additional storage after fully populating the base shelf.   Article requirements: 1. Configuration Manager 2. Configuration Client which is included with BVMS 3. Santricity Software   Step-by-step guide      
    View full article
    Top Contributors
    Icon--AD-black-48x48Icon--address-consumer-data-black-48x48Icon--appointment-black-48x48Icon--back-left-black-48x48Icon--calendar-black-48x48Icon--center-alignedIcon--Checkbox-checkIcon--clock-black-48x48Icon--close-black-48x48Icon--compare-black-48x48Icon--confirmation-black-48x48Icon--dealer-details-black-48x48Icon--delete-black-48x48Icon--delivery-black-48x48Icon--down-black-48x48Icon--download-black-48x48Ic-OverlayAlertIcon--externallink-black-48x48Icon-Filledforward-right_adjustedIcon--grid-view-black-48x48IC_gd_Check-Circle170821_Icons_Community170823_Bosch_Icons170823_Bosch_Icons170821_Icons_CommunityIC-logout170821_Icons_Community170825_Bosch_Icons170821_Icons_CommunityIC-shopping-cart2170821_Icons_CommunityIC-upIC_UserIcon--imageIcon--info-i-black-48x48Icon--left-alignedIcon--Less-minimize-black-48x48Icon-FilledIcon--List-Check-grennIcon--List-Check-blackIcon--List-Cross-blackIcon--list-view-mobile-black-48x48Icon--list-view-black-48x48Icon--More-Maximize-black-48x48Icon--my-product-black-48x48Icon--newsletter-black-48x48Icon--payment-black-48x48Icon--print-black-48x48Icon--promotion-black-48x48Icon--registration-black-48x48Icon--Reset-black-48x48Icon--right-alignedshare-circle1Icon--share-black-48x48Icon--shopping-bag-black-48x48Icon-shopping-cartIcon--start-play-black-48x48Icon--store-locator-black-48x48Ic-OverlayAlertIcon--summary-black-48x48tumblrIcon-FilledvineIc-OverlayAlertwhishlist