Security: Video

When the lens of FLEXIDOME 5100i camera is set to a higher tilt angle, you might encounter that the tilt is shifting when assembling the bubble, making it challenging to set a specific tilt angle to meet the desired Field of View (FoV). 

This article explains what to do with missing metadata in Milestone XProtect.

This article provides causes and solutions regarding the error code 49 Invalid Credentials when trying to login to LSA management software.

This article mentions that the material from which the Surface Mount Box of the NBE-5503-AL is made of is Aluminum.

Follow this article if you would like to optimize the image quality of your AUTODOME IP 5100i camera

The live view of the camera is loading indefinitely in Alarm Management Operator Interface > Live View and Investigation Mode and has no streaming video at all.

This article explains what you can do when the ‘Stream limits’ parameter set in the webpage of FLEXIDOME multi 7000i camera is not visible in BVMS Configuration Client.

There might be problems when you are trying to use the Forensic search function for FLEXIDOME Multi 7000i cameras (FW 8.71.0066) after upgrading from BVMS 10.1 to BVMS 11.1.1.65. The message is saying that “Forensic search must be configured for this workstation”

In this article can be found the solution regarding the black image of the ONVIF camera added in VSG in BVMS Operator Client.

This article provides causes and solutions regarding  the date and time indication inside the Image Panes  which are not visible in BVMS Operator Client.  

This article provides solution regarding 3rd party camera which is  added in VSG and is not displayed in the Device Tree from BVMS Configuration Client.

"An unexpcted error occured. Press F5 to go back to the operation mode selection page and retry. If the issue persist, contact technical support." Windows Server 2022, which is running on these machines is trying to contact their server, which in some cases (still being investigated why) is failing.  

Have a look at this article and learn how to fix the Add Scriptlet button which does not become active. It stays grayed out. Same happens with ClientScript and ServerScript.

Upon powering on the DIVAR IP all-in-one 7000 system you hear FAN spinning normal, LEDs are blinking at normal frequency and there are no error beep codes. However, there is no display when connected via VGA (or) DVI (or) DP. Check out this article and find out how to fix this!

At startup, a black screen is showing up and it is impossible to boot into the BIOS or attempt a reset by pressing the F7 key. How to fix this?

If  ‘Calibration upload to camera failed’ for CPP7.3 & CPP13 Bosch cameras please follow the below steps: Upgrade Configuration Manager to version 7.61. This must be used in combination with CPP13 Firmware 8.45 or later  

License expansions missing after upgrade to BVMS 11 in Remote Portal. Only 1 x MBV-XCHANPLU license activated instead of 16 x MBV-XCHANPLU. What to do?

This article explains what you shoud do when the display output suddenly shows “System Initializing 91” message on screen, while you are turning on your DIVAR IP 7000 R2

Find out from this article what can be done when your HP Z2 with Windows 10 LTSC 2021 and Nvidia driver has black screen (workstation does not boot up). The secure boot does not recognize this as a valid UEFI combination of OS & video board and blocks the booting.

This is a known design limitation and has always been present in the mentioned platforms. There are also no plans to correct this behavior.