Security: Video

License expansions missing after upgrade to BVMS 11 in Remote Portal. Only 1 x MBV-XCHANPLU license activated instead of 16 x MBV-XCHANPLU. What to do?

Check this article and find out how you can avoid displaying black image in Operator Client BVMS v11.0

“Error: Discontinuity in network stream!” appears randomly on the monitor/s connected to the VIDEOJET Decoder 7000 (7513). What could be the likely cause of this?

This article explains how to enable or disable audio recording for specific camera in BVMS, on action of BVMS Operator Client user.   Follow the step-by-step guide from this article.

The alarms appear, the forensic search is working fine, but the yellow lines don’t appear on the recording line/ timeline. What to do to display the yellow lines in timeline?

This article provides solution regarding 3rd party camera which is  added in VSG and is not displayed in the Device Tree from BVMS Configuration Client.

Starting with BVMS v10.0, you can leverage VRM Encryption Technology.

White cameo in BVMS Operator Client or "device failed" message may be caused by the NVIDIA graphic card driver that might not be compatible.

The connection of 2N® Helios IP intercom to BVMS and Bosch Access Control System is possible thanks to the implementation of ONVIF and Wiegand protocols, which ensure mutual compatibility.

When logging into BVMS Operator Client, there is an alarm showing up: “System Error - Server alarm queue capacity reached”. Find out from this article what could be the cause and how to solve this.

Follow this article to find out what you should check and do if your 3rd party camera is flashing between image and Bosch logo in Operator Client

BVMS Configuration Client or Operator Client does not display correctly on the DIVAR IP 4000 AIO when opened from the Kiosk mode and appears oversized in fullscreen.

By setting a low Frame rate and a long GOP, this affects the replay.  On the flip side high frame rate and short GOP can show pulsing Live video: 30 FPS @ GOP 10 = 3 I-Frames per sec (the video could appear pulsing; the Monitor refresh rate could also play a role here)

It is only possible to configure a single time server per BVMS system to be used as time source for the VRM encoders.

OPC server is installed on the BVMS server OPC client software is installed (the client used in this article is Softing OPC Toolbox Demo Client), and the user can connect to OPC server that is running on BVMS server, but the user cannot send any command from 3rd party OPC client to BVMS system, for example changing the status of virtual inputs. There are no events coming from OPC to BVMS and the OPC client is not present in the list for third party integrations with BVMS

Configure BVMS Operator Client credentials, so the application starts without requesting username and password and add the shortcut path of the BVMS OC to the Windows start up directory

New menu option "Import from csv file" available when right clicking on a VRM pool within the Device Tree of the Configuration Client. The option is not offered for Live only or Local storage cameras. 

You can create a Command Script using the following scripting languages: C# and VB.Net You cannot change the scripting language of an existing Command Script. You can create a Client Script or a Server Script. You can add multiple scriptlets to every script.

Find out from this article what you should check when there is a black image of your camera in Operator Client when clicking on the Instant Playback

The digital monitor wall functionality was removed since BVMS v11.0, and this is also stated in the release notes.