Security: Video

This article explains how you can  monitor the hardware health status of the DIVAR IP storage devices → Measure can be taken to repair the device if something fails.

After clicking the Forensic Search button in Bosch Video Management System (BVMS) - Operator Client, "Video image is not available" message is displayed. What could be the reason?

Maintaining the highest level of data security requires continuous improvements in all the system components - including software and device firmware. Recent changes in the camera firmware are focused on improving the security level overall.

This article explains what can you do when ‘Authentication failed’ message occurs when accessing VSG in BVMS v11.0

This article lists the initial troubleshooting steps for issues with ONVIF cameras, added to BVMS system as Live Only ONVIF cameras. The specific point in this scenario is VSG is not used.  

Various overlays in the video image provide important status information. But what does mean the blinking play button near the yellow exclamation icon?

This article explains step by step how to add a DIVAR Hybrid 5000 in BVMS Viewer and see Live image of cameras connected to the DIVAR.

This article contains the list of Security Advisories (SA) to inform you about identified security vulnerabilities in our product or service and proposed solutions.

This article explains how to configure an alarm communication between BVMS and Gmail e-mail address.

Question Why I cannot see my camera in the Logical Tree from Operator Client? Answer Please make sure that you have done all the steps below accordingly. Normally, to be able to view a camera in the Operator Client, you need to: Go to the Maps and Structure tab from Configuration Client. Drag and drop the camera in question from the Device Tree to the Logical Tree. Save and Activate the changes. This step is very important because otherwise, you will not be able to see the changes in Operator Client, even though the first 2 steps were carried out in Configuration Client.

Port Mapping Table dialog box displays the port mapping for the IP addresses of the configured devices in your BVMS. Be aware that this option was removed starting with BVMS 11.1

Applicable when using the following software application. Bosch Video Management System (BVMS) version 10.0.1 and above. Bosch Configuration Manager version 7.0 and above. Live page on the web browser for IP camera operating on firmware version 7.70.0126 and above.

Find out from this article what you should do to fix green Image panes in BVMS

This article explains how to find and calculate the specific size of BVMS logs on your server when the log starts to overwrite your own data.

Regular BVMS 12.0.1 installer will not run on any DIVAR IP all-in-one platform. The upgrade shall be performed via DIVAR IP System Manager application. Keep in mind: If you want the latest version of BVMS, it must be downloaded and applied with the latest version of System Manager.

This feature is not available in BVMS 10.1. You cannot do it automatically for multiple cameras. You can do it one by one manually through Config Client.

This behavior occurs when you have requested the SMA extension and you didn't upload the Activation file in the BVMS Configuration Client.

This article explains what you can do when the message:“The number of windows in this view exceeds the maximum limit set in the system parameters” appears in Operator Client with minimum 2 Monitors.

This article is applicable for all the requests related to third party products integrated in Bosch Video Management System Software over ONVIF.

BVMS OPC server restricts the use of some symbols in the camera names